Thanks for sharing that inforamtion up
My current bracket motor is similar, 4.35 bore with 4.25 stroke, 6.700 RPM BB Chevy type H beam steel rods with Diamond custom pistons with around 14.0 to one now with a set of Victor Max Wedge heads on E85. Early cold weather 400 block from AndyF (Many Thanks up bow) with 440 Source aluminum main caps and studs, hopefully it won't end up looking like yours luck Not filled either work
Did it fail during run? If so I hope nobody and nothing else got hurt luck
I have broke parts on a run and thought I was going to bend up some sheet metal several times, thanks to God I didn't get hurt or bend the cars boogie

Last edited by Cab_Burge; 09/28/17 02:36 AM.
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)