Why is your TPS showing 40-59% at idle. That value is completely out of the park. TPS voltage should be steady at idle since it is against the stop. The idle speed would be controlled by the IAC.
agree completely with this ! as badfish and ntstlgl-'70 mentioned, my power and ground need checked, as the pickup points for these are the ciggy lighter, so that may be an issue.
the motor mounts have been replaced, but now it's raining all the time, plus there is the grass cutting between showers my buddy has to contend with. and in the meantime, when we have a few minutes during the rains, we just built a pair of front wheels for his '64 ford galaxy. that story is one for a sit down discussion !
but we got them to .012 in both directions on the bead seats on one, and .017 on the other.
