Thanks for the replies. I have decided against the wrap. I did some research and discovered that a J pipe looks to be my best bet. I Googled "getting rid of exhaust drone" and got some surprising (to me) results addressing exactly what I am dealing with. I went back to my exhaust guy and he is going to install a J pipe just aft of my axle and forward of the exhaust tip (that is where I have the most room). Very interesting information and I would recommend anyone with a drone issue, regardless of what kind of system you are using, to check it out. Almost everyone that had something to say about J pipes or any kind of resonator pipe installed into their system reported that the pipe eliminated all or most of the drone. I hope to get this done next week and will report my results here after it is done.