Originally Posted By 375inStroke
Originally Posted By autoxcuda


1/8" of movement is a lot at 3 inches of compression?



I was getting 1/4" toe change per inch of travel on my road course car. Couldn't touch the brakes on corners or it would pull into the turn hard. Installed a bolt and heim joint style tie rod end and got it down to less than .010" toe change per inch of travel, and that problem went away. I don't want to use a heim joint on a street car, though. How do you adjust bump steer on your car?


And that would equal 0.03" of toe change per 3" of travel.

I have 0.082" per 3" in compression.

I have the Hotchkis hiems tie rod kit. The measurements I got where with no adjustments (lucked out). The hiems are worn now though.

Last edited by autoxcuda; 10/18/16 10:40 PM.