For giggles I`d go the the ISKY cams website and check out the shelf grinds for Mopars and you`ll see basic recommendations based on comp, gears and verts which will give you a good idea......
Sure, but in my experience their suggestions are inaccurate even for a 440. Looking for real world experiences with pump gas RB strokers. I have done a 416 smallblock with roughly the same compression (10.5) as this 499 project, but it was in a 3100lb Demon with 3.91 gears and a 3000+ stall. The SB strokers tolerate cams pretty good, I had a 259/263-110LSA Ultradyne solid in it, which idled choppy but was real streetable in that combo. I was hoping to roller cam this one and pull off the 3.23/2500 stall setup. Thanks!
