Originally Posted By 70RTRacer
It does not seem to be slipping. Also, it is fine when cold and starts doing it when it warms up. So, are both the sensor and the solenoid on the valve body?


Yes the sensor is up on the side while the solenoid is pointing down you can't miss them and are very easy to change once you drop the pan. Might aswell change the filter and adjust bands while replacing the sensors.

2000 Dakota R/T, 408 magnum, 727, Indy heads
1000cfm 4150 carb, 93 octane fuel.
motor; 10.258 @ 132.78
200 shot; 9.262 @ 144.69
racemagnum