I was going to ask the same question. If you raise the stall, It might wake it up or just be in the range the cam you have will work best. What is the LSA of the cam? Where do you have it installed? What are you shifting at now? 1.7 rockers on the intake may work well, but I have no experience with a setup like yours. I am assuming these are big port heads?
Just thinking duration is to high for my compression and to much overlap. Lsa is 106 now, tried different shift points made no difference. heads are indy ez-1 MW ports
You need more lift to utilize you flow.. but I would talk to a few cam companies.. one of them would be Bullit Cams.. they make some nice ones but they do tend to be aggressive
