Thrust bearing ate up In 300 Miles

Print Thread

Re: Thrust bearing ate up In 300 Miles [Re: Curt] #1669911 12/12/14 08:09 PM 12/12/14 08:09 PM
Joined: Mar 2007 Posts: 12,013 Finally a HUSKER again Moparnut426 I Live Here
Moparnut426 I Live Here Joined: Mar 2007 Posts: 12,013 Finally a HUSKER again	I personally have seen some converters hub be either too deep, or not beveled enough to sit flush and true in the crank hub causing a thrust to take a dump in very few miles. All I did was take a flapper sanding wheel on my 4 1/2" grinder and go to town. being careful not to go to deep causing a leaking converter.

Entire Thread
Subject	Posted By	Posted
Thrust bearing ate up In 300 Miles	rdakota340	09/11/14 01:47 AM
Re: Thrust bearing ate up In 300 Miles	Bad340fish	09/11/14 05:36 AM
Re: Thrust bearing ate up In 300 Miles	MR_P_BODY	09/11/14 05:59 AM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/11/14 12:27 PM
Re: Thrust bearing ate up In 300 Miles	dennismopar73	09/11/14 12:54 PM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/11/14 11:43 PM
Re: Thrust bearing ate up In 300 Miles	Monte_Smith	09/12/14 05:13 AM
Re: Thrust bearing ate up In 300 Miles	demongup	09/12/14 02:45 PM
Re: Thrust bearing ate up In 300 Miles	OUTLAWD	09/12/14 04:30 PM
Re: Thrust bearing ate up In 300 Miles	Monte_Smith	09/12/14 05:20 PM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/13/14 01:28 AM
Re: Thrust bearing ate up In 300 Miles	toddd	09/13/14 02:25 AM
Re: Thrust bearing ate up In 300 Miles	Sport440	09/13/14 02:39 AM
Re: Thrust bearing ate up In 300 Miles	Monte_Smith	09/13/14 02:43 AM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/13/14 09:50 PM
Re: Thrust bearing ate up In 300 Miles	1980volare	09/14/14 12:47 AM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/14/14 04:09 AM
Re: Thrust bearing ate up In 300 Miles	mr2performance	09/15/14 01:12 PM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/16/14 04:03 AM
Re: Thrust bearing ate up In 300 Miles	Monte_Smith	09/16/14 05:25 AM
Re: Thrust bearing ate up In 300 Miles	rdakota340	09/17/14 03:49 AM
Re: Thrust bearing ate up In 300 Miles	rdakota340	12/12/14 02:01 AM
Re: Thrust bearing ate up In 300 Miles	Curt	12/12/14 03:30 AM
Re: Thrust bearing ate up In 300 Miles	Anonymous	12/12/14 04:06 AM
Re: Thrust bearing ate up In 300 Miles	dthemi	12/12/14 11:19 PM
Re: Thrust bearing ate up In 300 Miles	Curt	09/14/14 07:57 PM
Re: Thrust bearing ate up In 300 Miles	Monte_Smith	09/15/14 05:37 AM
Re: Thrust bearing ate up In 300 Miles	gdonovan	09/15/14 11:35 AM
Re: Thrust bearing ate up In 300 Miles	Moparnut426	12/13/14 12:09 AM
Re: Thrust bearing ate up In 300 Miles	pittsburghracer	12/13/14 12:18 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To