Question on bench bleeding master cylinder

Print Thread

Re: Question on bench bleeding master cylinder [Re: RapidRobert] #1668586 09/10/14 11:11 PM 09/10/14 11:11 PM
Joined: Jun 2012 Posts: 1,386 Philadelphia PA Pynzo Drugs are bad
Pynzo Drugs are bad Joined: Jun 2012 Posts: 1,386 Philadelphia PA	The blue fitting is probably a generic 9/16-18 and the mopar fitting is an oddball 9/16-20. Best you can do is cross thread the plastic. I can lend you these if you want. Pm if interested, but I need them back. 8266956-image.jpg (68 downloads) Last edited by Pynzo; 09/10/14 11:13 PM.

Entire Thread
Subject	Posted By	Posted
Question on bench bleeding master cylinder	David_Trimble	09/07/14 11:01 PM
Re: Question on bench bleeding master cylinder	mikemee1331	09/07/14 11:29 PM
Re: Question on bench bleeding master cylinder	TooMany62s	09/07/14 11:47 PM
Re: Question on bench bleeding master cylinder	David_Trimble	09/08/14 12:40 AM
Re: Question on bench bleeding master cylinder	RapidRobert	09/08/14 03:31 AM
Re: Question on bench bleeding master cylinder	Pynzo	09/08/14 08:56 PM
Re: Question on bench bleeding master cylinder	floridian	09/08/14 09:25 PM
Re: Question on bench bleeding master cylinder	David_Trimble	09/09/14 04:08 AM
Re: Question on bench bleeding master cylinder	RapidRobert	09/09/14 04:27 AM
Re: Question on bench bleeding master cylinder	David_Trimble	09/11/14 12:53 AM
Re: Question on bench bleeding master cylinder	RapidRobert	09/11/14 01:27 AM
Re: Question on bench bleeding master cylinder	Pynzo	09/11/14 03:11 AM
Re: Question on bench bleeding master cylinder	David_Trimble	10/05/14 09:49 PM
Re: Question on bench bleeding master cylinder	Pynzo	10/05/14 10:30 PM
Re: Question on bench bleeding master cylinder	David_Trimble	10/05/14 10:36 PM
Re: Question on bench bleeding master cylinder	therocks	10/06/14 01:42 PM
Re: Question on bench bleeding master cylinder	RapidRobert	10/07/14 02:13 AM
Re: Question on bench bleeding master cylinder	David_Trimble	10/08/14 12:56 AM
Re: Question on bench bleeding master cylinder	David_Trimble	11/16/14 12:02 AM
Re: Question on bench bleeding master cylinder	RUNCHARGER	11/16/14 12:15 AM
Re: Question on bench bleeding master cylinder	savoy64	11/16/14 02:32 AM
Re: Question on bench bleeding master cylinder	340duster340	11/16/14 04:28 AM
Re: Question on bench bleeding master cylinder	RapidRobert	11/16/14 05:00 AM
Re: Question on bench bleeding master cylinder	David_Trimble	11/17/14 12:25 AM
Re: Question on bench bleeding master cylinder	340duster340	11/17/14 05:15 AM
Re: Question on bench bleeding master cylinder	John_Kunkel	09/08/14 08:23 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To