Quote:

Mike I installed the drivers seat with the existing adjuster and a 3/4" spacer on the rear attachment studs. On the passenger side, there was no adjustment mechanism so I made a rail out of 1 1/2" square tubing and also a 3/4" spacer in the rear. Of course the passenger side is not adjustable but it clears the rear glass at least an inch and a half. I could've redrilled the mounting holes in the floor pan to move both forward; but this will suffice in the meantime. I installed large fender washers underneath but maybe late I will make up a solid plate to tie all 4 mounting holes together for piece of mind. Again, thanks a lot Bud.



kool info on mounting them they look really nice. the new look on them is awsome in the pics so I know they are nice up close.

glad someone gets some use out of the only good part of that shifter. that longer handle for the trucks is just right.

give yours some time Roe. it will shape right up.