Quote:

Quote:

Something like this.




If I'm working on a old body(other than my own... nevermind that)
I will get frame points and centerline points of each
wheel (spindle on the fronts and centerline of the axle
at the wheel mounting points) so I can see if the suspension
points are in the same relationship to the frame points





Probably should have used a different pic. that was when I was actually squaring up the rear housing off of center line and the perpindicular line. I think I have one from actually making the center line off of the 4 link bracket.


Back in the swing of things at Painless again! Great to be back!