Quote:


I was given a '74 440m block thats already been .030 over.

Going to use the crank and rods from the 413, and order a kit with pistons, rings, bearings, etc.

I have a set of rpm heads, 84cc., a performer rpm intake, 850 holley vacuum secondary, 2,600 stall ptc converter, and 3.73 gears.

what would be a good cam to take advantage of the rpm heads?

Car weighs about 4,300lbs and will have a/c.



I don't know Keith, When I read the OP, I immediately thought, "He wants to run 9's on 2 stages!" But maybe I was reaching a little...

"Livin' in a powder keg and givin' off sparks" 4 Street cars, 5 Race engines