Yikes! Look at This Broken Wheel Stud

Print Thread

Re: Yikes! Look at This Broken Wheel Stud [Re: sam64] #1489864 08/24/13 03:17 PM 08/24/13 03:17 PM
Joined: Jul 2006 Posts: 382 Roseville MN 7 72swgnr enthusiast
72swgnr enthusiast 7 Joined: Jul 2006 Posts: 382 Roseville MN	you must use stainless fastening devices when working with aluminum (or aluminum) as stated regular steel and aluminum dont mix. corrosion starts to happen almost immediately.

Entire Thread
Subject	Posted By	Posted
Yikes! Look at This Broken Wheel Stud	cgall	08/24/13 05:28 PM
Re: Yikes! Look at This Broken Wheel Stud	cgall	08/24/13 05:30 PM
Re: Yikes! Look at This Broken Wheel Stud	cgall	08/24/13 05:32 PM
Re: Yikes! Look at This Broken Wheel Stud	Al_Alguire	08/24/13 05:51 PM
Re: Yikes! Look at This Broken Wheel Stud	Quicktree	08/24/13 05:31 PM
Re: Yikes! Look at This Broken Wheel Stud	Quicktree	08/24/13 05:52 PM
Re: Yikes! Look at This Broken Wheel Stud	cgall	08/24/13 06:08 PM
Re: Yikes! Look at This Broken Wheel Stud	cgall	08/24/13 06:12 PM
Re: Yikes! Look at This Broken Wheel Stud	sam64	08/24/13 07:08 PM
Re: Yikes! Look at This Broken Wheel Stud	72swgnr	08/24/13 07:17 PM
Re: Yikes! Look at This Broken Wheel Stud	jcc	08/24/13 10:52 PM
Re: Yikes! Look at This Broken Wheel Stud	cgall	08/24/13 11:05 PM
Re: Yikes! Look at This Broken Wheel Stud	rebel	08/24/13 11:22 PM
Re: Yikes! Look at This Broken Wheel Stud	jcc	08/25/13 02:27 AM
Re: Yikes! Look at This Broken Wheel Stud	J_BODY	08/25/13 03:51 AM
Re: Yikes! Look at This Broken Wheel Stud	goldmember	08/25/13 04:23 AM
Re: Yikes! Look at This Broken Wheel Stud	340B5	08/25/13 07:22 PM
Re: Yikes! Look at This Broken Wheel Stud	72Swinger	08/25/13 07:52 PM
Re: Yikes! Look at This Broken Wheel Stud	Challenger 1	08/25/13 08:38 PM
Re: Yikes! Look at This Broken Wheel Stud	oldtimer5151	08/25/13 08:45 PM
Re: Yikes! Look at This Broken Wheel Stud	Thumperdart	08/24/13 09:28 PM
Re: Yikes! Look at This Broken Wheel Stud	J_BODY	08/24/13 10:38 PM
Re: Yikes! Look at This Broken Wheel Stud	justinp61	08/24/13 10:43 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To