Jag fan clutch #

Print Thread

Re: Jag fan clutch # [Re: Suregrip391] #1488364 08/21/13 02:15 PM 08/21/13 02:15 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck OP Not enough dumb comments...yet
Mr.Yuck OP Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: I see, the fan from mopar performance comes with the clutch, you won't need that clutch because you need the shorter shaft Hayden clutch. I used my original fan on the Hayden with no problems, don't you have an original or perhaps you can find a used one? I might be able to use the MP unit however I'm using a 2 core (and the are much fatter than brass) 26" rad. I want to make sure it fits before I drop $115. Right now I'm running a Summit 18.5" plastic fan and it works great, but I hear I'm leaving 30hp on the table. I have run the MP piece before and on one car (67 coronet w/ a 440) it was too close to the rad... when you slammed on the brakes or took a hard trun the fins would rub the rad. I don't think I can run the plastic fan w/ the clutch?? yes...no

Hop To