383/400 stroker - 3.90, 3.91 or 3.92 crank?

Print Thread

Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank? [Re: JohnRR] #1304049 09/17/12 11:06 AM 09/17/12 11:06 AM
Joined: Jan 2003 Posts: 7,327 Toronto (YYZ) Ontario YYZ OP master
YYZ OP master Joined: Jan 2003 Posts: 7,327 Toronto (YYZ) Ontario	Test fitting soon. And yes, the counterweights look huge relative to a stock 383 crank. Given that budgets can escalate pretty quickly, staying with a 3.75" stroke and possibly the stock rod journal sizes may be the way to go. Or does one dump the crank and start with a 3.915 stroker crank from 440source and put the money into checking/trueing it?

Entire Thread
Subject	Posted By	Posted
383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/15/12 12:43 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	CompWedgeEngines	09/15/12 12:49 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	sr4440	09/15/12 01:04 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	gregsdart	09/15/12 01:36 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/15/12 05:28 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	67_Satellite	09/15/12 02:01 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	MR_P_BODY	09/15/12 02:56 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/15/12 04:22 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Belvedere1	09/16/12 04:52 AM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	440Jim	09/16/12 03:30 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/16/12 03:57 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/16/12 09:21 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	RUNCHARGER	09/16/12 09:42 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	23T Hemmee	09/16/12 09:49 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	BSB67	09/16/12 10:28 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Belvedere1	09/16/12 10:31 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/16/12 10:53 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Belvedere1	09/17/12 03:14 AM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/17/12 02:59 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/17/12 03:06 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	YYZ	09/17/12 03:07 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	JohnRR	09/17/12 03:47 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Thumperdart	09/17/12 04:05 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	jafr	09/15/12 05:19 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Thumperdart	09/15/12 04:45 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Cab_Burge	09/16/12 04:42 AM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Evil Spirit	09/16/12 08:45 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Brian Hafliger	09/16/12 09:04 PM
Re: 383/400 stroker - 3.90, 3.91 or 3.92 crank?	Evil Spirit	09/17/12 03:48 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To