So if you don't have $25k to spend on just the engine to go grudge racing, when it cost about half of that just to freshen one up, not to mention all the parts you will tear up sorting it out, what are we doing discussing it? They don't get any cheaper than that...And a brand new Predator motor will cost more than that...Your not going grudge racing on a $10k motor that is for sure. Cheapest rout is a centrifugal on a decent Mopar long block

7secCuda runs one, there's a vid in his sig, you should see how hard that car comes out on the launch. I think he uses a 7" converter...

Last edited by Dragula; 09/09/12 01:14 PM.

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk