727 front bushing - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 727 front bushing

Print Thread

Re: 727 front bushing [Re: MR_P_BODY] #1240072 05/27/12 10:17 AM 05/27/12 10:17 AM
Joined: Jan 2003 Posts: 16,930 NC 440Jim I Live Here
440Jim I Live Here Joined: Jan 2003 Posts: 16,930 NC	Quote: With a dial indicator ... check the conv for run out on the input hub... conv mounted to the crank and indicator mounted to the block with the indicator on the hub... turn the crank and see if its out I like to see 0.003" TIR or less, 0.010" TIR is bad, inbetween is marginal. 7223439-Converter_runout9_1024.jpg (33 downloads)

Entire Thread
Subject	Posted By	Posted
727 front bushing	cermac	05/26/12 07:34 PM
Re: 727 front bushing	MR_P_BODY	05/26/12 08:31 PM
Re: 727 front bushing	440Jim	05/27/12 02:17 PM
Re: 727 front bushing	jamesc	05/26/12 09:25 PM
Re: 727 front bushing	John_Kunkel	05/26/12 09:32 PM
Re: 727 front bushing	turbobitt	05/26/12 11:57 PM
Re: 727 front bushing	cermac	05/27/12 02:34 AM
Re: 727 front bushing	MR_P_BODY	05/27/12 02:39 AM
Re: 727 front bushing	cermac	05/27/12 02:45 AM
Re: 727 front bushing	MR_P_BODY	05/27/12 03:01 AM
Re: 727 front bushing	turbobitt	05/27/12 03:28 AM
Re: 727 front bushing	rickraw	05/27/12 04:57 AM
Re: 727 front bushing	cermac	05/26/12 11:59 PM
Re: 727 front bushing	cermac	06/16/12 12:40 PM
Re: 727 front bushing	MR_P_BODY	06/16/12 01:27 PM
Re: 727 front bushing	racerx	06/16/12 03:54 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1