Quote:

Quote:

I just put strange brakes on the front of my road runner and my prostars fit with no issues?




just to make sure i wasn't shooting my mouth off without cause i went and actually measured things.

the shoulder on the strange hub measures 3.243" and the hole in the weld wheel measures 3.180".

not that it's your case but someone could easily just throw these wheels on these hubs and not notice it but the wheel does NOT seat properly on the hub. i'm gonna hafta put the wheels in the mill and open up the holes.



Before you do that, ask around some more. If the issue is the strange hubs have too big a center dia, it would make them fit more wheels to reduce the hub center dia. But if the wheel hold dia is too small, then enlarge that.

The only thing I can add is I just measured the hole in two sets of my old Weld wheels (Drag Lites) and it is ~3.15" ID.


1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1