I think my little low deck works pretty well Sell those heads and buy some good ones


525" KB Block, B1MC Oval ported heads flow 457cfm, 850 roller, 15-1 compression built using all the best parts yo ucan buy. Propels my hunk o junk to 8.0's and been 169.6 at 2940lbs. Needs more gear and better convertor to really run well.

As for the question BORE makes HP, stroke just moves it around and will ad some torque. To greatly over simplify thing. You do not need a ton of stroke to make big power. Both of my engines are short stroke big bore deals. At 1050+ and 1314hp they do ok. Both are also relatively small these days. Heck the 99 is smaller than most street BB's are anymore and the B1 is as well.