How to handle Runs in clearcoat ?

Print Thread

Re: How to handle Runs in clearcoat ? [Re: 70Cuda383] #1214069 04/11/12 07:38 PM 04/11/12 07:38 PM
Joined: Jan 2003 Posts: 666 Anywhere the British Secret Se... M Moonraker mopar
Moonraker mopar M Joined: Jan 2003 Posts: 666 Anywhere the British Secret Se...	Quote: one thing I don't see mentioned yet, is if you try to sand it out alone, you can burn through the clear in the low spots on each side of the run, before the run itself is even with the rest of the clear. cut the run with a blade or file, THEN sand and buff it out. This is true. I have a hard plastic block I use on heavier runs to help prevent cutting into the lower parts of the clear before the run is knocked down when I'm sanding.

Entire Thread
Subject	Posted By	Posted
How to handle Runs in clearcoat ?	MileHighDart	04/11/12 04:12 PM
Re: How to handle Runs in clearcoat ?	herkamer	04/11/12 04:30 PM
Re: How to handle Runs in clearcoat ?	bonefish	04/11/12 04:48 PM
Re: How to handle Runs in clearcoat ?	1_WILD_RT	04/11/12 04:58 PM
Re: How to handle Runs in clearcoat ?	Moonraker	04/11/12 05:28 PM
Re: How to handle Runs in clearcoat ?	Moonraker	04/11/12 05:09 PM
Re: How to handle Runs in clearcoat ?	70Cuda383	04/11/12 05:23 PM
Re: How to handle Runs in clearcoat ?	Moonraker	04/11/12 11:38 PM
Re: How to handle Runs in clearcoat ?	bri440	04/12/12 01:03 AM
Re: How to handle Runs in clearcoat ?	MileHighDart	04/12/12 02:48 AM
Re: How to handle Runs in clearcoat ?	Mopargnome	04/12/12 05:51 AM
Re: How to handle Runs in clearcoat ?	BulletBob	04/12/12 06:05 AM
Re: How to handle Runs in clearcoat ?	GMP440	11/19/19 11:09 PM
Re: How to handle Runs in clearcoat ?	Liam	04/07/20 06:48 AM
Re: How to handle Runs in clearcoat ?	GomangoCuda	04/07/20 02:16 PM
Re: How to handle Runs in clearcoat ?	RTSrunner	04/15/12 04:59 AM
Re: How to handle Runs in clearcoat ?	71 FJ6 Charger	04/15/12 05:44 PM
Re: How to handle Runs in clearcoat ?	Pacnorthcuda	04/15/12 05:55 PM
Re: How to handle Runs in clearcoat ?	magnum440d100	04/15/12 06:45 PM
Re: How to handle Runs in clearcoat ?	Johnsnow Kornar	09/17/19 06:15 AM
Re: How to handle Runs in clearcoat ?	Pacnorthcuda	09/25/19 03:26 AM
Re: How to handle Runs in clearcoat ?	HUSTLESTUFF	09/17/19 12:12 PM
Re: How to handle Runs in clearcoat ?	HUSTLESTUFF	09/17/19 12:14 PM
Re: How to handle Runs in clearcoat ?	JDMopar	09/19/19 01:31 AM
Re: How to handle Runs in clearcoat ?	PAULS_340	09/25/19 02:11 AM
Re: How to handle Runs in clearcoat ?	Neil	09/25/19 02:20 AM
Re: How to handle Runs in clearcoat ?	Pacnorthcuda	09/25/19 03:28 AM
Re: How to handle Runs in clearcoat ?	MileHighDart	09/26/19 04:00 PM
Re: How to handle Runs in clearcoat ?	moparx	09/26/19 04:11 PM
Re: How to handle Runs in clearcoat ?	Salvador Johnson	11/02/19 08:17 PM
Re: How to handle Runs in clearcoat ?	jcc	11/03/19 01:07 AM
Re: How to handle Runs in clearcoat ?	emilies	11/19/19 06:25 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To