Attached is the print out from the alignment place for my '72 W200 with 32s. I had it checked after I made a new tie rod, so that was the main thing that was being corrected.

My main complaint is a little wandering and loose steering at highway speeds.

Since it's a solid front axle, is it as simple as adding a ~2* shim to each side to get the caster back into spec? I know it will change the pinion angle, but I'm willing to have a little vibration if it steers better the rest of the time.

I've also read that going to ~+4-5* caster with big tires can help a lot as well.

Thanks for any thoughts