904 & 8 3/4. What u-joints to use? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 904 & 8 3/4. What u-joints to use?

Print Thread

Re: 904 & 8 3/4. What u-joints to use? [Re: VITC_GTX] #1144125 12/25/11 11:12 PM 12/25/11 11:12 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	A 904 uses a 26 spline and a 727 uses a 29 spline... weight of the car will make the big difference BUT you would most likely be better off with the 7290 joint

Entire Thread
Subject	Posted By	Posted
904 & 8 3/4. What u-joints to use?	VITC_GTX	12/26/11 02:48 AM
Re: 904 & 8 3/4. What u-joints to use?	scratchnfotraction	12/26/11 03:09 AM
Re: 904 & 8 3/4. What u-joints to use?	RapidRobert	12/26/11 03:47 AM
Re: 904 & 8 3/4. What u-joints to use?	70AARcuda	12/26/11 04:21 AM
Re: 904 & 8 3/4. What u-joints to use?	MR_P_BODY	12/26/11 03:12 AM
Re: 904 & 8 3/4. What u-joints to use?	VITC_GTX	12/26/11 03:29 AM
Re: 904 & 8 3/4. What u-joints to use?	62maxwgn	12/26/11 04:43 AM
Re: 904 & 8 3/4. What u-joints to use?	scratchnfotraction	12/26/11 05:23 AM
Re: 904 & 8 3/4. What u-joints to use?	VITC_GTX	12/26/11 05:36 AM
Re: 904 & 8 3/4. What u-joints to use?	slantzilla	12/26/11 05:41 AM
Re: 904 & 8 3/4. What u-joints to use?	Cab_Burge	12/26/11 06:02 AM
Re: 904 & 8 3/4. What u-joints to use?	MoparforLife	12/26/11 01:04 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1