Can you guys give me a quick rundown of the most common causes of the injectors not getting power and how to test for them? I am no mechanic, just a guy who is crazy enough to tackle a project like this with no help except the forums.
Well, the computer drives the injectors with inputs
from the different sensors... cam, crank, temp and
throttle position sensors... basically the computer
closes the circuit to ground to fire them and based
upon the rpm and load tells them how long(duty cycle)
to hold them open.... from just what I've read here
your crank sensor is working(I believe) so my first
plan of attack would be to get a DRB on it for the
codes and yours should be a DRB2... without running
the codes from the DRB2 your guessing and just
throwing money at it... most any parts stores have
them... you might be able to rent theirs to take it
home to use... if you could drive it there its usually
free.... BUT as a guess... it could be the cam sensor
but thats guessing
