Quote:
You'd want to loosen(not tighten) the lash a few thou if you want to help the bottom end. I think the cams a little long for the combo,I'd knock 10-14 degrees out and you'll be fine. Tim @ bullet cams has what you need if you cannot tune the current combo to suit your needs.
No tighten the valves a tad to see if it likes it. It may like the cam advanced some if it runs better. I would only tighten them a few thousands just to see how it runs. I know its not advancing the cam but it will open the vales sooner just a tad. Course it also opens them more so you have to be careful if it does not have alot of PTV clearence. Ron
Last edited by 383man; 12/12/11 09:39 PM.
