Quote:

---

Quote:

---

448 Stroker. 282S Magnum cam lashed at 23 instead of stock 22, 84 cc Eddy's, Crane 1.6's, RPM intake 850dp with 4hole 1 inch spacer, 1.75 headers, 11 inch converter.

A *&^%load of torque, best 60 ft time of 1.65 launching at 1100.

I was wondering in an earlier post about switching to your cam :^/

The giggle factor because of the torque is pretty high with a 3.91 gear.

It is a good winter project, but I wonder, because of the 4 speed if there is a better cam for you than either the magnum 282S or the .557.

---

Probably is a really a better cam aside from those but, they are the cams I have on hand, that and a MP P4120237 (509cam hyd). Christmas and money as said before are tight but I do have talent the want to tinker.

I know you have a SB but how many Rpm will yours turn?

Mine has plenty of power in the band as stated before and will pull well up to 7k (that my limit with what I have in the motor). Just really doesnt wake up till about 3k and above.

---