Quote:

all things being equal i would say the ballast went south, do you have spark at all from the coil? do you know what ohm the ballast is supposed to be rated at (should be stamped on it somewhere). can you just run a temporary jumper wire and bypass the ballast and see if it starts.



Thanks,
No spark at all, not sure it will being that its hot on both sides of the coil. My stock set up only has 6 volts in the run position with only 1.2 volts or so on the negative side of the coil.

I'll try jumping it tomorrow, just to try it.

Moparlee