Brazing an exhaust port on an iron head

Print Thread

Re: Brazing an exhaust port on an iron head [Re: 70Cuda383] #1056759 08/21/11 12:09 PM 08/21/11 12:09 PM
Joined: Oct 2003 Posts: 11,688 W. Kentucky justinp61 I Live Here
justinp61 I Live Here Joined: Oct 2003 Posts: 11,688 W. Kentucky	Quote: but, if you're really worried, maybe look for someone who can weld cast aluminum up with steel rod. I'd pay to see that trick

Entire Thread
Subject	Posted By	Posted
Brazing an exhaust port on an iron head	domingo	08/19/11 05:09 PM
Re: Brazing an exhaust port on an iron head	S/ST 3040	08/19/11 05:17 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 05:27 PM
Re: Brazing an exhaust port on an iron head	DJVCuda	08/19/11 05:28 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 06:16 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/19/11 06:34 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 09:17 PM
Re: Brazing an exhaust port on an iron head	POS Dakota	08/19/11 09:40 PM
Re: Brazing an exhaust port on an iron head	dannysbee	08/19/11 10:06 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/20/11 03:45 PM
Re: Brazing an exhaust port on an iron head	domingo	08/20/11 04:11 PM
Re: Brazing an exhaust port on an iron head	HEMIFRED	08/21/11 04:52 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/19/11 07:54 PM
Re: Brazing an exhaust port on an iron head	dogdays	08/19/11 08:46 PM
Re: Brazing an exhaust port on an iron head	torkrules	08/21/11 01:25 PM
Re: Brazing an exhaust port on an iron head	70Cuda383	08/21/11 03:45 PM
Re: Brazing an exhaust port on an iron head	justinp61	08/21/11 04:09 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/21/11 04:17 PM
Re: Brazing an exhaust port on an iron head	Mike Swann	08/21/11 04:30 PM

Hop To