Brazing an exhaust port on an iron head

Print Thread

Re: Brazing an exhaust port on an iron head [Re: domingo] #1056745 08/19/11 01:17 PM 08/19/11 01:17 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	Brazing is a very common practice for repairing exhaust ports.

Entire Thread
Subject	Posted By	Posted
Brazing an exhaust port on an iron head	domingo	08/19/11 05:09 PM
Re: Brazing an exhaust port on an iron head	S/ST 3040	08/19/11 05:17 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 05:27 PM
Re: Brazing an exhaust port on an iron head	DJVCuda	08/19/11 05:28 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 06:16 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/19/11 06:34 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 09:17 PM
Re: Brazing an exhaust port on an iron head	POS Dakota	08/19/11 09:40 PM
Re: Brazing an exhaust port on an iron head	dannysbee	08/19/11 10:06 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/20/11 03:45 PM
Re: Brazing an exhaust port on an iron head	domingo	08/20/11 04:11 PM
Re: Brazing an exhaust port on an iron head	HEMIFRED	08/21/11 04:52 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/19/11 07:54 PM
Re: Brazing an exhaust port on an iron head	dogdays	08/19/11 08:46 PM
Re: Brazing an exhaust port on an iron head	torkrules	08/21/11 01:25 PM
Re: Brazing an exhaust port on an iron head	70Cuda383	08/21/11 03:45 PM
Re: Brazing an exhaust port on an iron head	justinp61	08/21/11 04:09 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/21/11 04:17 PM
Re: Brazing an exhaust port on an iron head	Mike Swann	08/21/11 04:30 PM

Hop To