Brazing an exhaust port on an iron head

Print Thread

Re: Brazing an exhaust port on an iron head [Re: MR_P_BODY] #1056757 08/21/11 09:25 AM 08/21/11 09:25 AM
Joined: Nov 2003 Posts: 2,715 closer to Canadian beer! torkrules I'm neurotic
torkrules I'm neurotic Joined: Nov 2003 Posts: 2,715 closer to Canadian beer!	Quote: If your really worried about brasing it, weld it with high content nickle rod +1 on that. I had a pin hole in an iron head. we heated it with a torch and zapped it with a high nickle rod. I think the heads are still around to this day.

Entire Thread
Subject	Posted By	Posted
Brazing an exhaust port on an iron head	domingo	08/19/11 05:09 PM
Re: Brazing an exhaust port on an iron head	S/ST 3040	08/19/11 05:17 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 05:27 PM
Re: Brazing an exhaust port on an iron head	DJVCuda	08/19/11 05:28 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 06:16 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/19/11 06:34 PM
Re: Brazing an exhaust port on an iron head	domingo	08/19/11 09:17 PM
Re: Brazing an exhaust port on an iron head	POS Dakota	08/19/11 09:40 PM
Re: Brazing an exhaust port on an iron head	dannysbee	08/19/11 10:06 PM
Re: Brazing an exhaust port on an iron head	Hemi Allstate	08/20/11 03:45 PM
Re: Brazing an exhaust port on an iron head	domingo	08/20/11 04:11 PM
Re: Brazing an exhaust port on an iron head	HEMIFRED	08/21/11 04:52 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/19/11 07:54 PM
Re: Brazing an exhaust port on an iron head	dogdays	08/19/11 08:46 PM
Re: Brazing an exhaust port on an iron head	torkrules	08/21/11 01:25 PM
Re: Brazing an exhaust port on an iron head	70Cuda383	08/21/11 03:45 PM
Re: Brazing an exhaust port on an iron head	justinp61	08/21/11 04:09 PM
Re: Brazing an exhaust port on an iron head	MR_P_BODY	08/21/11 04:17 PM
Re: Brazing an exhaust port on an iron head	Mike Swann	08/21/11 04:30 PM

Hop To