Quote:

Hey gang..
Anyone done one of these conversions? (Hotchkis Dodge Challenger Suspension)?

http://www.youtube.com/watch?v=8fHj0b-ey5Y&feature=youtube_gdata_player

I have a friend who just got the complete kit. Looks like it's pretty straight forward. She mentioned I would have to weld something, but I think that's the front sway bar bracket on the lower control arm if the car's not equipped with it. But, her car is a '71 Challenger R/T, so it should have the front sway bar. Other than that, looks to be all bolt-on stuff I could do in my garage. I'm pretty good with front suspension, so that doesn't bother me.....




Thanks everyone for the nice comments about our TVS kit. We look forward to getting your opinions after some more seat time with our system installed.

Hemi68Charger – We made the kit to be as straightforward as possible with as little necessary modification to the original car as possible. As you mentioned, if your car didn’t have a front sway bar, you’ll have to weld on the included sway bar mount tabs. You have to relieve a little bit of the upper mounts to clear the upper control arms and you’ll have to weld in the front of the subframe connectors.



Here’s a link to the downloadable PDF instructions:

http://www.hotchkis.net/_uploaded_files/80110.pdf