opinion on build - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer opinion on build

Print Thread

opinion on build #986154 05/04/11 05:19 PM 05/04/11 05:19 PM
Joined: Nov 2010 Posts: 204 washington A AB&E OP enthusiast
AB&E OP enthusiast A Joined: Nov 2010 Posts: 204 washington	okay motor heads what hp do ya think 70 440hp /stk. hp manifolds pistons changed to 9:5 bored 30 over mr 6pk #3 grind cam 906 heads are stock w/ hvy springs per mr 6pk stock 6pk carbs adjusted to mr 6pk specs electronic ign timing set at mr 6pk specs motor is in a 69a12 clone with dana 60 373 gears & a 23 spline 4spd with stock redline bias. what do you think she will run in Quarter & hp est. thanks

Re: opinion on build [Re: AB&E] #986155 05/04/11 05:32 PM 05/04/11 05:32 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	13.20 with those tires 12.90 if you can get it to hook. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: opinion on build [Re: Mr.Yuck] #986156 05/04/11 06:24 PM 05/04/11 06:24 PM
Joined: Nov 2010 Posts: 204 washington A AB&E OP enthusiast
AB&E OP enthusiast A Joined: Nov 2010 Posts: 204 washington	that would work for a street car Any estimate of hp I was thinking around 425-450hp ?

Re: opinion on build [Re: AB&E] #986157 05/04/11 06:47 PM 05/04/11 06:47 PM
Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,... The Cuda Guy enthusiast
The Cuda Guy enthusiast Joined: Jul 2007 Posts: 376 FT Campbell, KY / Clarksville,...	With the info provided 450 sounds dead on. Don Street/Strip 73 Barracuda

Re: opinion on build [Re: The Cuda Guy] #986158 05/04/11 07:00 PM 05/04/11 07:00 PM
Joined: Nov 2010 Posts: 204 washington A AB&E OP enthusiast
AB&E OP enthusiast A Joined: Nov 2010 Posts: 204 washington	curiosity with 30 over pistons what cubes would it be now?? thanks for the info abe

Re: opinion on build [Re: AB&E] #986159 05/04/11 07:02 PM 05/04/11 07:02 PM
Joined: Jan 2003 Posts: 20,793 A collage of whims topside Too Many Posts
topside Too Many Posts Joined: Jan 2003 Posts: 20,793 A collage of whims	446" at .030 over

Re: opinion on build [Re: AB&E] #986160 05/04/11 08:18 PM 05/04/11 08:18 PM
Joined: Feb 2005 Posts: 4,314 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,314 Prospect, PA	I assume that the stock heads means unported and the race weight is 3900lbs. Here are the two extremes IMO: 1) If you don't spend a bunch of time at the track testing, tuning, and practicing and you only go out once in the middle of the summer: 13.7 at 104. 2) If you track test, tune and practice driving, in good air: 12.70 at 110.

Re: opinion on build [Re: BSB67] #986161 05/04/11 10:40 PM 05/04/11 10:40 PM
Joined: Feb 2003 Posts: 1,665 Milwaukee, WI Prince_Valiant top fuel
Prince_Valiant top fuel Joined: Feb 2003 Posts: 1,665 Milwaukee, WI	Agree with the above... Driver mod is always an important one to go along with the test n' tune. I've seen Hemi 'cuda barely get out of the 15's. Yet that same car on that same day with a little work and a whole lot better driving could have see 12's too imo. In your case, all things ideal including traction/suspension, 12.7's 108. 1979 Dodge Lil' Red Express - 360 rwhp, 13.2 @ 103mph 1968 Coronet: 318, 2.76, 15.2 @ 92mph! (SOLD) 1976 Valiant: 360, 3.90, 12.90 @ 106 (SOLD) 1989 Shelby CSX #500/500

Re: opinion on build [Re: AB&E] #986162 05/05/11 07:56 PM 05/05/11 07:56 PM
Joined: Nov 2010 Posts: 204 washington A AB&E OP enthusiast
AB&E OP enthusiast A Joined: Nov 2010 Posts: 204 washington	Quote: okay motor heads what hp do ya think 70 440hp /stk. hp manifolds pistons changed to 9:5 bored 30 over mr 6pk #3 grind cam 906 heads are stock w/ hvy springs per mr 6pk stock 6pk carbs adjusted to mr 6pk specs electronic ign timing set at mr 6pk specs motor is in a 69a12 clone with dana 60 373 gears & a 23 spline 4spd with stock redline bias. what do you think she will run in Quarter & hp est. thanks Well things have changed (due to machine shop) I now have kb237 pistons 40 over deck has been shaved 200000 i think heads are stk form 346s everything else is same do you think there will be much of a change in figures on hp & 1/4 mile

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1