|
Re: 70 cuda steering column ?
[Re: 340swing]
#930798
02/17/11 12:16 PM
02/17/11 12:16 PM
|
Joined: Mar 2007
Posts: 3,287 West Coast, USA
jbc426
master
|
master
Joined: Mar 2007
Posts: 3,287
West Coast, USA
|
Are you talking about the dust seal at the bottom of the shaft just above the nylon "bearing"? I used a length of 1 inch wide, black, spongy, medium closed cell, foam tape(non-adhesive backed). I rolled it around the tube until I got the desired thickness(it took about a foot), and secured it with a dab of weatherstrip adheasive.
1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's 1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)
|
|
|
Re: 70 cuda steering column ?
[Re: 340swing]
#930800
02/18/11 12:24 AM
02/18/11 12:24 AM
|
Joined: Jul 2008
Posts: 313 Ct, Oxford
340swing
OP
enthusiast
|
OP
enthusiast
Joined: Jul 2008
Posts: 313
Ct, Oxford
|
Here are the pics. What goes here? does anybody have one or know where to get one?
Last edited by 340swing; 02/18/11 12:25 AM.
|
|
|
|
|
|