Roller lifter for B1 Engine question?
#926523
02/11/11 05:59 PM
02/11/11 05:59 PM
|
Joined: Jan 2003
Posts: 6,145 Melbourne , Australia
LA360
OP
master
|
OP
master
Joined: Jan 2003
Posts: 6,145
Melbourne , Australia
|
For a standard B1 headed engine, what configuration offset should be used? I have been looking around and come across some various options. For example the ISKY 3772-LO-180 has 8 on centre lifters, 4 left 0.180" and 4 right 0.180". A Comp Cams Elite Roller lifter 98827-16 has 8 left 0.180" and 8 right 0.180"
Thanks for you help!
Alan Jones
|
|
|
Re: Roller lifter for B1 Engine question?
[Re: MR_P_BODY]
#926527
02/12/11 10:58 AM
02/12/11 10:58 AM
|
Joined: Feb 2004
Posts: 3,441 Mo.
supercomp
master
|
master
Joined: Feb 2004
Posts: 3,441
Mo.
|
|
|
|
Re: Roller lifter for B1 Engine question?
[Re: supercomp]
#926528
02/12/11 10:58 AM
02/12/11 10:58 AM
|
Joined: Jan 2003
Posts: 16,928 NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,928
NC
|
Quote:
98827-16 Elite Race™ .180" Offset Roller Lifters .904" 4 Pairs Centered & Left 4 Pairs Centered & Right (4) 98829CL-2 (4) 98829CR-2
From the Comp Cams web site:
web page Interchangeable pushrods seats can be easily swapped for centered, left or right offsets. A patent-pending design allowing oil control through the pushrod insert allows builders to modify lifters to meter extra oil to the top.
|
|
|
Re: Roller lifter for B1 Engine question?
[Re: 440Jim]
#926530
02/13/11 09:17 AM
02/13/11 09:17 AM
|
Joined: Oct 2005
Posts: 976 ontario canada
mac56
super stock
|
super stock
Joined: Oct 2005
Posts: 976
ontario canada
|
Quote:
As an alternative, the Comp 892 lifters have offset intake pushrod seats, push rod oiling, and about half the cost of the Elite series. But they don't have the features of the Elite series either...
And they have an offset pushrod set without pushrod oiling also.
Jim do you know the part number without pushrod oiling? Thanks
|
|
|
Re: Roller lifter for B1 Engine question?
[Re: mac56]
#926531
02/13/11 10:30 AM
02/13/11 10:30 AM
|
Joined: Jan 2003
Posts: 16,928 NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,928
NC
|
It is on the Comp Cams web site under BB Mopar roller lifters. Not hard to find. You can find it with a few clicks. I don't know it off the top of my head, but it is a long number (5 digits?) not a 3 digit one.
EDIT: 87019
Last edited by 440Jim; 02/13/11 10:39 AM.
|
|
|
Re: Roller lifter for B1 Engine question?
[Re: mac56]
#926534
02/13/11 11:59 AM
02/13/11 11:59 AM
|
Joined: Jan 2003
Posts: 16,928 NC
440Jim
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,928
NC
|
Mac, This is a screen capture from last years catalog for roller lifters: Supercomp, Thanks for the update, they still show it on their web site: 892L, 892R, 892C (individual, not sets). web page And Summit says ships tomorrow (Mon), so that implies it is in stock? Summit web page
|
|
|
|
|