post your procharger setups - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech post your procharger setups

Print Thread

Page 1 of 2

1

2

post your procharger setups #824244 10/07/10 11:27 AM 10/07/10 11:27 AM
Joined: Feb 2009 Posts: 1,705 Nebraska 70VcodeCoronetRT OP top fuel
70VcodeCoronetRT OP top fuel Joined: Feb 2009 Posts: 1,705 Nebraska	Hello, please post your procharger combos and performance. Cool to see what everyone is doing. LATER

Re: post your procharger setups [Re: 70VcodeCoronetRT] #824245 10/08/10 08:37 AM 10/08/10 08:37 AM
Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY	All I hear are the crickets.... '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: post your procharger setups [Re: Dragula] #824246 10/08/10 09:52 AM 10/08/10 09:52 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	this is my old set-up. Nothing fancy. I did it all for around $2200 including carb and fuel system upgrades. Mild 440 (cast pistons) in a 67 cornet best et before boost 12.90 @ 104. (ran 13.0's in the heat) Best et after 6psi of boost 12.08 @114. The kit was for a SBC, I had the crank pulley re-drilled and cut/welded the mounting bracket to fit a BB mopar. car probably would have run easy 11's with a pulley change. Did it but sold the car before I could run it at 8psi. 6239338-sc2aa.JPG (331 downloads)

Re: post your procharger setups [Re: Mr.Yuck] #824247 10/08/10 10:13 AM 10/08/10 10:13 AM
Joined: Mar 2010 Posts: 601 Niles, Michigan Hitman340 mopar
Hitman340 mopar Joined: Mar 2010 Posts: 601 Niles, Michigan	I did a pro charger project for a customer along with help from Steve Morris.It was a 93 Dakota street driven 394ci,W5 heads,850 cfm pro system blow throw carb with a F1R.It weighted 3400lbs. The dyno read 998hp with a safe tune up and it ran 9.27 @ 144 in street trim. jeffallisonms@yahoo.com

Re: post your procharger setups [Re: Hitman340] #824248 10/08/10 10:41 AM 10/08/10 10:41 AM
Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY	I want more info on this beast that Mopar_Rich did recently... 2000hp on pump gas! 6239400-2000_HP_F3_Hemi_on_dyno_500pix.jpg (206 downloads) Last edited by Dragula; 10/08/10 10:42 AM. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: post your procharger setups [Re: Dragula] #824249 10/08/10 12:38 PM 10/08/10 12:38 PM
Joined: Jan 2003 Posts: 2,023 Lincoln NE 4 440forPOWER super gas
440forPOWER super gas 4 Joined: Jan 2003 Posts: 2,023 Lincoln NE	Looking for some real world bb street cruisers in the 650 700hp range.

Re: post your procharger setups [Re: 440forPOWER] #824250 10/08/10 01:20 PM 10/08/10 01:20 PM
Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY	Quote: Looking for some real world bb street cruisers in the 650 700hp range. My N/A pump gas efi Hemi engine is over 700hp....And my engine builders mild N/A pump gas Hemi Charger is making 655hp... Last edited by Dragula; 10/08/10 01:22 PM. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: post your procharger setups [Re: Dragula] #824251 10/09/10 08:53 PM 10/09/10 08:53 PM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® pro stock
Keith Black® pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	1500hp. 525 cu.in EFI. F2. Intercooled. 6-spd manual. pump gas. we're making front pulley/setup at present. all under-hood. 6241639-frontview1.jpg (277 downloads) -------------------------------- Darren Beale Keith Black Racing Engines®

Re: post your procharger setups [Re: Keith Black®] #824252 10/09/10 08:54 PM 10/09/10 08:54 PM
Joined: Jun 2009 Posts: 1,212 QLD Australia Keith Black® pro stock
Keith Black® pro stock Joined: Jun 2009 Posts: 1,212 QLD Australia	..unlawful 4 link. rear setup. 345/30x19's 6241642-DSC00766.jpg (261 downloads) -------------------------------- Darren Beale Keith Black Racing Engines®

Re: post your procharger setups [Re: Keith Black®] #824253 10/09/10 09:16 PM 10/09/10 09:16 PM
Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA bigtimeauto Trophy Winner
bigtimeauto Trophy Winner Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA	my car, f-2,20lbs boost, bottom 8's 3300lbs, no intercooler BB, TT5,Procharged 3300lb Street Car 4.79/154

Re: post your procharger setups [Re: Dragula] #824254 10/09/10 09:28 PM 10/09/10 09:28 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: Quote: Looking for some real world bb street cruisers in the 650 700hp range. My N/A pump gas efi Hemi engine is over 700hp....And my engine builders mild N/A pump gas Hemi Charger is making 655hp... yeah but your N/A hemi costs 3x times what aboost wedge costs and doesn't need a ton of converter and can doesn't need to spin to 8k.

Re: post your procharger setups [Re: Mr.Yuck] #824255 10/10/10 11:20 AM 10/10/10 11:20 AM
Joined: Jan 2003 Posts: 28,067 Irving, TX feets Senior Management
feets Senior Management Joined: Jan 2003 Posts: 28,067 Irving, TX	Quote: Quote: Quote: Looking for some real world bb street cruisers in the 650 700hp range. My N/A pump gas efi Hemi engine is over 700hp....And my engine builders mild N/A pump gas Hemi Charger is making 655hp... yeah but your N/A hemi costs 3x times what aboost wedge costs and doesn't need a ton of converter and can doesn't need to spin to 8k. I bet it's also FAR from what most of us would consider a street car. My mild turbo 440 made the Hot Rod Power Tour from Dallas to Green Bay and back without missing a beat. It sucked down 87 octane and gave me 17 mpg. Yeah, there are naturally aspirated engines making far more power but I bet the guys have far more money than I do in this one and they don't behave as nicely. We are brothers and sisters doing time on the planet for better or worse. I'll take the better, if you don't mind. - Stu Harmon

Re: post your procharger setups [Re: feets] #824256 10/24/10 11:25 PM 10/24/10 11:25 PM
Joined: Aug 2006 Posts: 114 Crossville,TN 526ciduster member
526ciduster member Joined: Aug 2006 Posts: 114 Crossville,TN	nothing close to a street car but.......... old procharged setup 6267350-0514080736.jpg (390 downloads) Last edited by 526ciduster; 10/24/10 11:35 PM. Outlaw 10.5 526ci, F3R procharged tfx hemi, Big Stuff 3 PTP RACING

Re: post your procharger setups [Re: 526ciduster] #824257 10/24/10 11:40 PM 10/24/10 11:40 PM
Joined: Aug 2006 Posts: 114 Crossville,TN 526ciduster member
526ciduster member Joined: Aug 2006 Posts: 114 Crossville,TN	new procharged setup. 6267381-1024002033.jpg (337 downloads) Outlaw 10.5 526ci, F3R procharged tfx hemi, Big Stuff 3 PTP RACING

Re: post your procharger setups [Re: 526ciduster] #824258 10/25/10 07:06 AM 10/25/10 07:06 AM
Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,386 Taxes & Virus's R-US, NY	Quote: new procharged setup. Nice, I like it. If I only had the money. I would have the set-up Mopar Rich has in my Cuda. Is it me, or does that new engine sit higher in the front. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: post your procharger setups [Re: Dragula] #824259 10/25/10 09:19 PM 10/25/10 09:19 PM
Joined: Nov 2003 Posts: 220 M Mr440GSS enthusiast
Mr440GSS enthusiast M Joined: Nov 2003 Posts: 220	D1SC, 440, stock Eddy heads, Torker II, Comp .488 hydraulic, 5 speed Tremec, 3.54 geared stock weight B body @ 8psi. Ran 123mph and change, no need to post the ET, lol... 6268723-032.JPG (305 downloads)

Re: post your procharger setups [Re: Mr440GSS] #824260 10/26/10 09:34 AM 10/26/10 09:34 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: D1SC, 440, stock Eddy heads, Torker II, Comp .488 hydraulic, 5 speed Tremec, 3.54 geared stock weight B body @ 8psi. Ran 123mph and change, no need to post the ET, lol... looks fimiliar, same cam 224/234-465/488 no e-heads or 5 speed and only 6psi. never got to try the 8psi pulley. I think my 3.91's worked against me. ran 12.0's at 114. 6269430-sc2.JPG (160 downloads)

Re: post your procharger setups [Re: 526ciduster] #824261 10/26/10 04:53 PM 10/26/10 04:53 PM
Joined: May 2008 Posts: 1,238 North Cackilacky S sdaurity pro stock
sdaurity pro stock S Joined: May 2008 Posts: 1,238 North Cackilacky	Quote: nothing close to a street car but.......... old procharged setup How fast did you go with the stock block and -1's with that set-up? One day I will have something cool here.

Re: post your procharger setups [Re: sdaurity] #824262 10/28/10 09:18 PM 10/28/10 09:18 PM
Joined: Aug 2006 Posts: 114 Crossville,TN 526ciduster member
526ciduster member Joined: Aug 2006 Posts: 114 Crossville,TN	4.95 @ 150mph at 3,200 lbs still trying to tame the hemi. only a few aborted passes 5.14 131mph 3,300lbs Outlaw 10.5 526ci, F3R procharged tfx hemi, Big Stuff 3 PTP RACING

Re: post your procharger setups [Re: Dragula] #824263 10/28/10 09:20 PM 10/28/10 09:20 PM
Joined: Aug 2006 Posts: 114 Crossville,TN 526ciduster member
526ciduster member Joined: Aug 2006 Posts: 114 Crossville,TN	Quote: Quote: new procharged setup. Nice, I like it. If I only had the money. I would have the set-up Mopar Rich has in my Cuda. Is it me, or does that new engine sit higher in the front. Its the angle of the picture i used the same motor and tranny mounts. Outlaw 10.5 526ci, F3R procharged tfx hemi, Big Stuff 3 PTP RACING

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1