Posted By: 70VcodeCoronetRT
post your procharger setups - 10/07/10 03:27 PM
Hello, please post your procharger combos and performance. Cool to see what everyone is doing. LATER 
post your procharger setups
Posted By: Dragula
Re: post your procharger setups - 10/08/10 12:37 PM
All I hear are the crickets.... 
Posted By: Mr.Yuck
Re: post your procharger setups - 10/08/10 01:52 PM
this is my old set-up. Nothing fancy. I did it all for around $2200 including carb and fuel system upgrades. Mild 440 (cast pistons) in a 67 cornet best et before boost 12.90 @ 104. (ran 13.0's in the heat) Best et after 6psi of boost 12.08 @114. The kit was for a SBC, I had the crank pulley re-drilled and cut/welded the mounting bracket to fit a BB mopar. car probably would have run easy 11's with a pulley change. Did it but sold the car before I could run it at 8psi.
Posted By: Hitman340
Re: post your procharger setups - 10/08/10 02:13 PM
I did a pro charger project for a customer along with help from Steve Morris.It was a 93 Dakota street driven 394ci,W5 heads,850 cfm pro system blow throw carb with a F1R.It weighted 3400lbs.
The dyno read 998hp with a safe tune up and it ran 9.27 @ 144 in street trim.
The dyno read 998hp with a safe tune up and it ran 9.27 @ 144 in street trim.
Posted By: Dragula
Re: post your procharger setups - 10/08/10 02:41 PM
I want more info on this beast that Mopar_Rich did recently... 
2000hp on pump gas!
2000hp on pump gas!
Posted By: 440forPOWER
Re: post your procharger setups - 10/08/10 04:38 PM
Looking for some real world bb street cruisers in the 650 700hp range. 
Posted By: Dragula
Re: post your procharger setups - 10/08/10 05:20 PM
Quote:
Looking for some real world bb street cruisers in the 650 700hp range.
My N/A pump gas efi Hemi engine is over 700hp....And my engine builders mild N/A pump gas Hemi Charger is making 655hp...
Posted By: Keith Black®
Re: post your procharger setups - 10/10/10 12:53 AM
1500hp.
525 cu.in EFI. F2. Intercooled. 6-spd manual.
pump gas.
we're making front pulley/setup at present. all under-hood.
525 cu.in EFI. F2. Intercooled. 6-spd manual.
pump gas.
we're making front pulley/setup at present. all under-hood.
Posted By: Keith Black®
Re: post your procharger setups - 10/10/10 12:54 AM
..unlawful 4 link. rear setup. 345/30x19's
Posted By: bigtimeauto
Re: post your procharger setups - 10/10/10 01:16 AM
my car, f-2,20lbs boost, bottom 8's 3300lbs, no intercooler
Posted By: Mr.Yuck
Re: post your procharger setups - 10/10/10 01:28 AM
Quote:Quote:
Looking for some real world bb street cruisers in the 650 700hp range.
My N/A pump gas efi Hemi engine is over 700hp....And my engine builders mild N/A pump gas Hemi Charger is making 655hp...
yeah but your N/A hemi costs 3x times what aboost wedge costs and doesn't need a ton of converter and can doesn't need to spin to 8k.
Posted By: feets
Re: post your procharger setups - 10/10/10 03:20 PM
Quote:Quote:Quote:
Looking for some real world bb street cruisers in the 650 700hp range.
My N/A pump gas efi Hemi engine is over 700hp....And my engine builders mild N/A pump gas Hemi Charger is making 655hp...
yeah but your N/A hemi costs 3x times what aboost wedge costs and doesn't need a ton of converter and can doesn't need to spin to 8k.
I bet it's also FAR from what most of us would consider a street car.
My mild turbo 440 made the Hot Rod Power Tour from Dallas to Green Bay and back without missing a beat. It sucked down 87 octane and gave me 17 mpg.
Yeah, there are naturally aspirated engines making far more power but I bet the guys have far more money than I do in this one and they don't behave as nicely.
Posted By: 526ciduster
Re: post your procharger setups - 10/25/10 03:25 AM
nothing close to a street car but..........
old procharged setup
old procharged setup
Posted By: 526ciduster
Re: post your procharger setups - 10/25/10 03:40 AM
new procharged setup.
Posted By: Dragula
Re: post your procharger setups - 10/25/10 11:06 AM
Quote:
new procharged setup.
Nice, I like it. If I only had the money. I would have the set-up Mopar Rich has in my Cuda.
Is it me, or does that new engine sit higher in the front.
Posted By: Mr440GSS
Re: post your procharger setups - 10/26/10 01:19 AM
D1SC, 440, stock Eddy heads, Torker II, Comp .488 hydraulic, 5 speed Tremec, 3.54 geared stock weight B body @ 8psi.
Ran 123mph and change, no need to post the ET, lol...
Ran 123mph and change, no need to post the ET, lol...
Posted By: Mr.Yuck
Re: post your procharger setups - 10/26/10 01:34 PM
Quote:
D1SC, 440, stock Eddy heads, Torker II, Comp .488 hydraulic, 5 speed Tremec, 3.54 geared stock weight B body @ 8psi.
Ran 123mph and change, no need to post the ET, lol...
looks fimiliar, same cam 224/234-465/488 no e-heads or 5 speed and only 6psi. never got to try the 8psi pulley. I think my 3.91's worked against me. ran 12.0's at 114.
Posted By: sdaurity
Re: post your procharger setups - 10/26/10 08:53 PM
Quote:
nothing close to a street car but..........
old procharged setup
How fast did you go with the stock block and -1's with that set-up?
Posted By: 526ciduster
Re: post your procharger setups - 10/29/10 01:18 AM
4.95 @ 150mph at 3,200 lbs
still trying to tame the hemi. only a few aborted passes 5.14 131mph 3,300lbs
still trying to tame the hemi. only a few aborted passes 5.14 131mph 3,300lbs
Posted By: 526ciduster
Re: post your procharger setups - 10/29/10 01:20 AM
Quote:Quote:
new procharged setup.
Nice, I like it. If I only had the money. I would have the set-up Mopar Rich has in my Cuda.
Is it me, or does that new engine sit higher in the front.
Its the angle of the picture i used the same motor and tranny mounts.
Posted By: sdaurity
Re: post your procharger setups - 10/29/10 03:57 PM
Quote:
4.95 @ 150mph at 3,200 lbs
still trying to tame the hemi. only a few aborted passes 5.14 131mph 3,300lbs
Nice I just got mine switched over to XFI and a 101mm and water intercooler. I'm gonna give mine all it can handle at least thats the plan. I would love to go that fast but 5. teens will be fine. Good luck with your new set-up.