Re: Denso ultra mini alternator?
[Re: '72CudaRacer]
#815349
09/27/10 05:30 AM
09/27/10 05:30 AM
|
Joined: Jan 2003
Posts: 27,468 So Cal
autoxcuda
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 27,468
So Cal
|
FWIW, I got the 102mm mini from like a 87-90-ish? Chevy Nova/Spectrum with the single groove steel V-belt pulley. Got it from the junkyard. Tested fine. It is the same physically as powermaster p/n 8122/8128 6.78 lbs. 102 mm. ( http://www.powermastermotorsports.co...ternators.html ) They are not one wire stock. But they have an internal regulator. I have yet to install it or really spend time trying to figure out the fabrication of the brackets. I think the 93mm might be an industrial application (forklift?)?? This came from this thread: http://www.forabodiesonly.com/mopar/showthread.php?t=83923 Quote:
I'm looking at adapting one off of a Toyota brand forklift. An older one off of a 7 series model are rated at 37amps. My plan is install it on my drag race car.
|
|
|
Re: Denso ultra mini alternator?
[Re: '72CudaRacer]
#815352
09/27/10 09:52 AM
09/27/10 09:52 AM
|
Joined: Feb 2008
Posts: 2,648 GA
Boosted
master
|
master
Joined: Feb 2008
Posts: 2,648
GA
|
I am using a Mitsu alt... You can see it here on my motor.. Maybe not as small as you want but is smaller than the oem ver.
2011 RAM3500
1967 Fastback Barracuda with some go fast goodies.
|
|
|
Re: Denso ultra mini alternator?
[Re: RockChip]
#815355
09/28/10 01:17 AM
09/28/10 01:17 AM
|
Joined: Apr 2007
Posts: 782 Minnesota
skep419
super stock
|
super stock
Joined: Apr 2007
Posts: 782
Minnesota
|
not the ultra but works for me 89 4 runner I was able to message my factory 360 brackets works great. napa 138283 lifetime warranty 2138283 3 year
|
|
|
Re: Denso ultra mini alternator?
[Re: skep419]
#815357
09/28/10 07:00 AM
09/28/10 07:00 AM
|
Joined: Dec 2009
Posts: 1,074 detroit, mi
POS Dakota
super stock
|
super stock
Joined: Dec 2009
Posts: 1,074
detroit, mi
|
Quote:
not the ultra but works for me 89 4 runner I was able to message my factory 360 brackets works great.
napa 138283 lifetime warranty 2138283 3 year
How many amps is that one rated at?
|
|
|
Re: Denso ultra mini alternator?
[Re: '72CudaRacer]
#815362
10/14/10 12:58 PM
10/14/10 12:58 PM
|
Joined: Jan 2003
Posts: 17,844 S.E. Michigan
ZIPPY
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,844
S.E. Michigan
|
Back to the ultra mini: I've looked for awhile now and am thinking it is probably the Denso 100211-4200 or maybe the 100211-6960 (with one of the mounting lugs removed)....as seen on page 16 of this document: http://www.dixie-electric.com/catalog/LiftTrucksExchange.pdfTo arrive at that I matched up 50A, the B+ stud location, and the appearance of the sheetmetal cover on the back of the alt. I can't see the connector. it may well be one of the other ones, or a hybrid....take your pick I guess It appears to me to be a power equipment (tractor/skid steer/forklift) type alternator, not a car alternator unless it's a mighty small car. But then I'm still using a 78 amp squareback, and have kept electrical accessories to a minimum because of it....so you might not want to listen to me
Rich H.
Esse Quam Videri
|
|
|
|
|