Energy Suspension A-body master kit

Print Thread

Energy Suspension A-body master kit #712900 06/01/10 12:47 AM 06/01/10 12:47 AM
Joined: Jun 2004 Posts: 893 Tustin, CA P pishta OP super stock
pishta OP super stock P Joined: Jun 2004 Posts: 893 Tustin, CA	Im not a front end expert, but I know what most of these bushings are for. Of course there are no descriptions of what these bushings go to, so: What are the large bushings for that are circled? The lower ones have slots in the ID, the upper ones are larger and are smooth. Most others I labeled. Maybe front leaf bushings? 6014047-DSC00019.JPG (88 downloads) 12 Grand Caravan 06 T&C 02 T&C 96 Breeze 65 Barracuda "S"

Re: Energy Suspension A-body master kit [Re: pishta] #712901 06/01/10 01:16 AM 06/01/10 01:16 AM
Joined: Jan 2003 Posts: 27,468 So Cal autoxcuda Too Many Posts
autoxcuda Too Many Posts Joined: Jan 2003 Posts: 27,468 So Cal	Quote: Im not a front end expert, but I know what most of these bushings are for. Of course there are no descriptions of what these bushings go to, so: What are the large bushings for that are circled? The lower ones have slots in the ID, the upper ones are larger and are smooth. Most others I labeled. Maybe front leaf bushings? They are front leaf eye bushings. There are two different diameters used in A-bodies. So they give you both to cover you. Cool! My 68 340 original rear spring car had the larger diameter that was the same diameter as my 71 Challenger R/T. I'm guessing the smaller diameter is for the /6 and/or non HD suspension cars. I bought a kit from Mancini once for my Barracuda that had the small diameter bushings only. I looks like they are giving you two sets of front leaf spring eye metel sleeves. Are those different ID and/or OD? Are they different width? OR that is the second set of sleeves shorter sway bar sleeves for those two shorter sway bar end link bolts??? Last edited by autoxcuda; 06/01/10 01:23 AM.

Hop To