Re: Roller Cam 360 Differences?
[Re: EV2RUNNER]
#682623
04/28/10 02:05 PM
04/28/10 02:05 PM
|
Joined: Jun 2008
Posts: 1,822 Colorado
denfireguy
top fuel
|
top fuel
Joined: Jun 2008
Posts: 1,822
Colorado
|
Quote:
Im wanting to convert a 92 360 back to pre roller style lifters and pushrods. Are the lifters, pushrods and cam the only thing that changed? I was hoping I could just change out the Lifters and pushrods and be able to run a regular LA aftermarket cam..Am I correct? I know I could have a cam reground to fit the roller setup but I wanna go Old style LA.. Thanks
As I understand it, the only differences are more clearance for the roller lifters in the magnum block casting and a passage to pump oil into the valve lifter gallery. I went the opposite direction going with a Magnum block with roller lifters for my 73. Craig
2014 Ram 1500 Laramie, 73 Cuda Previous mopars: 62 Valiant, 65 Fury III, 68 Fury III, 72 Satellite, 74 Satellite, 89 Acclaim, 98 Caravan, 2003 Durango Only previous Non-Mopar: Schwinn Tornado
|
|
|
Re: Roller Cam 360 Differences?
[Re: denfireguy]
#682624
04/28/10 02:29 PM
04/28/10 02:29 PM
|
Joined: Jan 2003
Posts: 16,123 Grand Haven, MI
patrick
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,123
Grand Haven, MI
|
Quote:
Quote:
Im wanting to convert a 92 360 back to pre roller style lifters and pushrods. Are the lifters, pushrods and cam the only thing that changed? I was hoping I could just change out the Lifters and pushrods and be able to run a regular LA aftermarket cam..Am I correct? I know I could have a cam reground to fit the roller setup but I wanna go Old style LA.. Thanks
As I understand it, the only differences are more clearance for the roller lifters in the magnum block casting and a passage to pump oil into the valve lifter gallery. I went the opposite direction going with a Magnum block with roller lifters for my 73. Craig
the '92 is an LA...the lifter bores of a roller cam block are slightly taller. the holes in the head the pushrods go through are slightly larger, due to the different pushrod angle with the longer roller lifter/shorter pushrods combo.
other than that, a flat tappet with the proper pushrods will drop right in. the question is, why? you can reuse your existing roller lifters, and most likely your pushrods with a new or reground roller cam. that puts it in the price of $150 (reground)-$300 (new). by the time you buy a decent cam/lifter combo (comp XE or lunati voodoo) you're looking at $180-200, plus new pushrods ($30-100), so you're not saving any money, and you have the potential worry/headache of a cam lobe going flat.
1976 Spinnaker White Plymouth Duster, /6 A833OD 1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!*** 2011 Toxic Orange Dodge Charger R/T 2017 Grand Cherokee Overland 2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)
|
|
|
Re: Roller Cam 360 Differences?
[Re: patrick]
#682626
04/28/10 04:07 PM
04/28/10 04:07 PM
|
Joined: Aug 2003
Posts: 12,291 Kent, Wa
340SHORTY
Truck Nut
|
Truck Nut
Joined: Aug 2003
Posts: 12,291
Kent, Wa
|
you should trade me blocks...
I am truckless..
|
|
|
Re: Roller Cam 360 Differences?
[Re: EV2RUNNER]
#682628
04/28/10 04:34 PM
04/28/10 04:34 PM
|
Joined: Jan 2003
Posts: 16,123 Grand Haven, MI
patrick
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,123
Grand Haven, MI
|
Quote:
Basicly, it all boils down to time... I need to have the motor built, in and running by the end of next month. Ive already got most of the parts here, the rest are in stock at summit. I dont wanna take a chance of going with a reground cam and not having it back in time.
hughes sells them on an exchange basis....
turnaround when I had Bullet Cams do mine was exactly 1 week, but I paid a little extra for 2 day guaranteed shipping both ways.
1976 Spinnaker White Plymouth Duster, /6 A833OD 1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!*** 2011 Toxic Orange Dodge Charger R/T 2017 Grand Cherokee Overland 2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)
|
|
|
|
|