Re: stealth vs 906 Heads
[Re: Mr.Yuck]
#637380
03/12/10 01:39 PM
03/12/10 01:39 PM
|
Joined: Feb 2003
Posts: 21,318 Manitoba, Canada
DaytonaTurbo
Too Many Posts
|
Too Many Posts
Joined: Feb 2003
Posts: 21,318
Manitoba, Canada
|
Stealths are going to flow more than a mildly tweaked set of 906's. I agree with swingin, your combo is too mild to benefit much from the stealths. I would leave your heads bone stock for now, don't invest anything into them. Then later on down the road if you choose to step up to more cam like the 60304, rpm intake, 850 carb, add a set of headers, then you'll be able to put the extra flow of aftermarket heads to use.
|
|
|
Re: stealth vs 906 Heads
[Re: roy2345]
#637382
03/12/10 04:31 PM
03/12/10 04:31 PM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Thanks fellas! Yall have answered my questions. I'll hang in there with the 906's. My aluminum intake isn't much better performance then my stock intake?
If it's a "Perfomer" it's better but not by much. The Performer RPM is the good one.
|
|
|
Re: stealth vs 906 Heads
[Re: roy2345]
#637383
03/12/10 05:09 PM
03/12/10 05:09 PM
|
Joined: Jan 2003
Posts: 7,497 Austin, TX
HemiDave
master
|
master
Joined: Jan 2003
Posts: 7,497
Austin, TX
|
Quote:
because the guy doing my Machine work is charging around 3 cenos for the 3 angle valve job
Do you mean C notes? a.k.a. $100 bills?
Yes, stay with the stock heads for now. And the Performer RPM intake is the high performance one..
Dave
|
|
|
Re: stealth vs 906 Heads
[Re: HemiDave]
#637384
03/12/10 05:13 PM
03/12/10 05:13 PM
|
Joined: Feb 2003
Posts: 21,318 Manitoba, Canada
DaytonaTurbo
Too Many Posts
|
Too Many Posts
Joined: Feb 2003
Posts: 21,318
Manitoba, Canada
|
Quote:
Quote:
because the guy doing my Machine work is charging around 3 cenos for the 3 angle valve job
Do you mean C notes? a.k.a. $100 bills?
Yes, stay with the stock heads for now. And the Performer RPM intake is the high performance one..
Dave
But basically a waste with stock flowing heads. In his case the intake manifold is not the bottleneck.
|
|
|
Re: stealth vs 906 Heads
[Re: HemiDave]
#637386
03/12/10 05:21 PM
03/12/10 05:21 PM
|
Joined: Jul 2003
Posts: 6,343 SE PA.
QuickBpBp
master
|
master
Joined: Jul 2003
Posts: 6,343
SE PA.
|
Quote:
But if he wants to start 'somewhere'..that or a nice used LD340...
Dave
That an awful lot of machine work to fit a small block intake to a big block there is better options..
|
|
|
Re: stealth vs 906 Heads
[Re: QuickBpBp]
#637387
03/12/10 05:25 PM
03/12/10 05:25 PM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Quote:
But if he wants to start 'somewhere'..that or a nice used LD340...
Dave
That an awful lot of machine work to fit a small block intake to a big block there is better options..
CH4B - 440 goooood intake
|
|
|
Re: stealth vs 906 Heads
[Re: Dodgem]
#637392
03/14/10 11:08 PM
03/14/10 11:08 PM
|
Joined: Aug 2009
Posts: 2,050 Mooresburg, Tn
'72CudaRacer
top fuel
|
top fuel
Joined: Aug 2009
Posts: 2,050
Mooresburg, Tn
|
Quote:
Cast iron has a tendency to get brittle with age and heat cycles.
Especially after you grind the snot out of them doing port work.
|
|
|
Re: stealth vs 906 Heads
[Re: '72CudaRacer]
#637394
03/15/10 02:11 PM
03/15/10 02:11 PM
|
Joined: Mar 2008
Posts: 5,746 Ontario, Canada
Dodgem
master
|
master
Joined: Mar 2008
Posts: 5,746
Ontario, Canada
|
Quote:
Quote:
Cast iron has a tendency to get brittle with age and heat cycles.
Especially after you grind the snot out of them doing port work.
|
|
|
|
|