Quote:

---

what is the difference between the max wedge pullys and hemi race pullys and the ones your looking for.

---

Quote:

---

The '64-'65 Hemi damper and pulleys all have Hemi only part numbers but, never having seen them, I can't say what the difference(s) are.

Jim Kramer would know.

---

Chrysler themselves couldn't keep it straight as far as the part numbers.They listed the damper under quite a few preceeding numbers.The 64/65 race only thin damper is list as P-2532795,P-3830183 and P-5249698 the thick NASCAR and street Hemi is listed as P-2532202,P-3870854 and P-5249699.The 440/383 wedge was also listed as P-3830183(the same as the race Hemi)Chrysler also claimed the timing marks differ from the thick and thin damper.GO FIGURE,to add to all the confusion there is a mismatch of superceeding numbers from way back.Also a hodpodge of pulleys with different size,ratio,depth and diameter.Who wants to be the expert and claim the exact part#s and discription.NOT ME

Quote:

---

I thought 64/65 race Hemis had the thin damper All the race dampers I aquired from Chrysler were of the thin variety.66 and up street Hemis used the thick one.

---

Quote:

---

I was told my rebuild of a 68 SS Cuda originally had 65 A-990 pulleys,????

---

Quote:

---

So BOB, why do you not want to answer me on sizes & if you want to sell any ?

---

Jeff,I'am not trying to sell anything,I'am not going to tell anyone which pulleys are the exact size.We are not in the restoration(hype) business.Anyone who wants to come to the shop and dig through the tons of junk is more than welcome or if they want to send the
demensions of the pulleys they are looking for I may have one of the guys look for them.As stated having been through that era and seen the hodpodge and mismatch of what Chrysler put out with the max-wedge and Hemi cars nothing seem to surprise me and I'am not going to be the one to say "this is the fact or part"and get in a pissing match with all the Gurus.Best to contact Jim Kramer.I sold(gave) him his first race car.

Quote:

---

OK Bob, my mistake, sorry, just needing someone to let me know "to the best of their knowledge"
What size pulleys were used on the 68 SS cuda, as I have read the 65 A-990 hemi cars, pulleys were used as that's what was available, unfortunately I have no idea what size the A-990 were either, so thinking you have probably seen a LOT of original stuff, a BEST GUESS would help !!!! And if you happened to have some for sale, I need them, so as of today, I think I need a alt & water pump pulley from a 65 A-990 hemi,.....thanks, and PS, I understand about the guru contest,,,,,,,

---

Jim Kramer 724-285-5566