Acetone has many abilites to break down surface tension and promote "wetting" on a molecular level.
How about making your own thread loosner with Acetone and a very thin oil like Gibbs and you will have super penetrant!!
or plain hydrolic oil and Acetone 1/2 and 1/2.
and even with gasoline being cheap I still tweek my cars with Acetone, let the begin

did you hear about this from those damm amish?

ha, Mr. Stoltzfush.

I,ll try this one at work! I can have some VERY frozen stuff (rust)THANKS!

gimmie a min im gonna check my nuts be right back

GIBBS PENETRATING OIL #6623

Issue Date: June 16, 2004  Revised Date: June 6, 2006  Supersedes: June 16, 2004  Prepared by: Vera Burnell

In the event of an emergency, call the 24-hour emergency hotline: (800) 255-3924.

SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Manufactured by: APOLLO TECHNOLOGIES
1850 S. Cobb Industrial Blvd. NFPA Ratings
Smyrna, GA 30082 Flammability
Telephone Number: (770) 433-0210  Mon-Fri 8a.m.-5p.m. CST 3
Common Name: GIBBSTM Brand Lubricant Toxicity 1 0 Reactivity
Chemical Name: Mixture packaged in pressurized aerosol spray container.
Special

SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS

PRINCIPAL HAZARDOUS COMPONENT(S) CAS NO. OSHA PEL ACGIH TLV OTHER LIMITS
2 Propanol 67-63-0 400 ppm 400 ppm solvent
Heptane 142-82-5 500 ppm 400 ppm Solvent extender
Petroleum Distillates 64742-54-7 5 mg/m3 5 mg/m3 Light hydro oil
Carbon Dioxide 124-38-9 5000 ppm 5000 ppm propellant
*Section 313 Supplier Notification – Indicates hazardous ingredients which are toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-to-Know Act of 1986 and of 40 CFR 372

COW JUICE

PENGUINPEE

SHEEPMILK

PIGHORMONE

DOGPILE

Also is a great parts cleaner as it evaporates without leaving a residue and it can be used to thin epoxy paints. I use in on all parts before powder coating.

I read on a diesel forum that diesel loves acetone

I never tryed it....anyone?

yes i put 10 oz in my 91-7.3 diesel tow truck runs much better

My neighbor drinks the stuff, he says it helps him communicate with God with no bad hangovers

Na, thats his daughter, they dont have cable

Well then... I wonder what they do with belt dressing

............

Great for cleaning aluminum befor tig welding.

I use it in Taxidermy, it's great for disolving and removing fat and grease

A long time ago, when I was young and very naive.. I was a rookie at a machine shop... The foreman handed me a styrofoam cup and told me to fill it with acetone...

Being so young and trying to get on his good side, I sprung to the task... filled the cup 3/4 full, put the cap back on the metal can... I carefully picked up the cup not wanting to spill, turned around slowly and took one step.. The bottom of the cup completely dissapeared and the acetone spilled all over the floor..

I said WHAT THE........??? and just about that time, the entire shop busted up laughing.. I was pranked!!!!

awsome as ultrasonic tank carb cleaner

and fun to mix with 80%peroxide, dash of nitric and
play demo man with the solid percipitates.(2-4 gm.)
maybe add 100% white phosphous for trigger.
dont try this in your kitchen without being
HAZMAT CERT.

Alrightey then, I would like to take the time now to apologize for breaking your balls last night in the quest for bad humor, I am sorry and I will never do it again I am glad you live very far away and I hope you don't mess with long range rockets

LOL!!!!!!!!!!!!
yes I do missiles too from B1B and F15/16 propulsion systems and radar guided missile system design and test. that was the first 8 years of my career at Raytheon and very prolific.
we could hit a dime on the sidewals in times squear from a space sattelite microwave beam then direct "something" to follow that path
better than lasers cause you cant see the red dot before incomming
we can also implant
some AcetonePerox atoms on semiconductor chips and make them self destruct given the right code transmission. they could be Mfg and put in anything electronic and let sit dormant till time for a blast
military secret-got out of the bag from the pentagon leaked harddrive caper few years ago

anyone got a pic of an Amish girl welding????
wearing a full leather welders chaps and suit LOL.
wheres all the photo shop guys.
I think they used Thermite though and a coal pit.
anyone got pics of an Amish Hot Pit
they were foung hanging round the blacksmith shop usually waiting on a big rod to be worked
Matt do you have that Amish/Aunt working on your Arrow still????
send pixx please.

chillin!!!!!!!
think il leave my 60 Deg AC room and work on some cars for a change.

Greg you are hilarious!!!
I was just messin with you.
You know your stuff!!!
If we werent so close, i wouldnt mess with you.
You and Fred are 2 of my closests friends.

I know matt or else we wouldnt bring up your Amish girl friends lol!!!!

HAHA only tuesdays after midnight.
I really do hate the amish, but noone knows the real reason why.

Is this gona be another group hug thing

look i wasnt trying to ruin Greg's post.
I am sorry Greg, i wont make no more amish comments.
I am going to try some of this Acetone, and see what kind of trouble i can get in.

infact what could i use Acetone in to help me in my daily life Greg? give me some good ideas here

GROUP HUG
ADD 3 OZ TO YOUR NEW CAR AND TELL US WHAT YOU NOTICE, UNBIASED

I DONT THINK SO.

ahh shittt!! i just drank a half cup with it. now you tell me.

I uSE"
AMISH JUICE
5 OZ TO A GALLON MIX AND GET STUCK IN A DITCH IN PA.
THEN ACCOSTED BY A BUNCH OF PEOPLE WEARING BLACK & WHITE
sometimes im attacked by a stampede of black and white cows, then I use "Cow Juice" additive. the extra calcium makes my Rods stiffer

but seriously I use various mixes depending on the atmospheric pressure and air density/tempature at the time.
generally a mixture of:
Acetone
Xylene
Kerosene
Tranny fluid.

Acetone and Xylene are approx the same cept Xylene is carcinogen so which ever one is gotten free.
Kerosene has high BTU content and boosts octane and provides additional power (Kjoles) per cyl filling.
ATF also provides additional BTU power and octane boost plus some lubricity propites to top cylinder area.
for 10 gallons of 89 pump gas run 4:2:2. ratio
4 ozAcetone
2 oz Kerosene
2 oz ATF

In the first few post this was something to read but
since then MOST of this is just BS

After 25 years rebuilding marine diesels, soaking rusted nuts with anything is a waste of time, Man discovered heat long before acetone, If there is any rust we don't reuse the fastener anyway, Now back to the Amish ladies or sheep ect...

Fred,
"as long as they will drink from the cup, I will fill it with knowlege from my fountain."

famous quote: HemiGreg July 24,2009

they can spill it out and waste good info at their own demise!!!!!

yet another great quote. im on a roll pin.

SECTION XII - Ingredients/Identity Information
Ingredient # 01
Ingredient Name BENZENE, 1,2-DICHLORO-
CAS Number 95501
Percent 0
Ingredient # 02
Ingredient Name MINERAL SPIRITS
CAS Number 8052413
Percent 0
Ingredient # 03
Ingredient Name NAPTHENIC HYDROCARBONS
CAS Number 64742525
Percent 0