What 500ci combos and 1/4 mile times to expect? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer What 500ci combos and 1/4 mile times to expect?

Print Thread

What 500ci combos and 1/4 mile times to expect? #376730 07/15/09 10:26 PM 07/15/09 10:26 PM
Joined: Jan 2009 Posts: 85 Rhode Island G GoodfellaHenry70 OP member
GoodfellaHenry70 OP member G Joined: Jan 2009 Posts: 85 Rhode Island	Hi guys, I have a 69 road runner with a new 496 stroker setup, auto, 2800 stall converter, running 275/60/15 Drag Radials and thinking about what kinda times I can run at the track. Not sure what gears to toss in, 3:55, 3:91, 4:10? I'm running a cam with about 550" lift and 285 duration, eddy aluminum heads, 1 7/8" headers and an eddy 800cfm for now. Looking to hear your similar based combos, with or without NOS, gears, specificly about and 1/4 times and mph. Thanks for your input "No big deal...It's called Advanced Dilusionary schizophrenia with involuntary narcissistic rage." Just call me Hank.

Re: What 500ci combos and 1/4 mile times to expect? [Re: GoodfellaHenry70] #376731 07/15/09 10:37 PM 07/15/09 10:37 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	At .050 duration and LSA?? advertised tells vertualy nothing!!

Re: What 500ci combos and 1/4 mile times to expect? [Re: GoodfellaHenry70] #376732 07/15/09 10:39 PM 07/15/09 10:39 PM
Joined: Apr 2009 Posts: 228 northeast texas S strokin73cuda enthusiast
strokin73cuda enthusiast S Joined: Apr 2009 Posts: 228 northeast texas	So far my combo is very similar to yours but with a six pack and 3.55s I'm curious to see too. 496 stroker,Indy srs , new best 6.87 @ 98 1.46 60'

Re: What 500ci combos and 1/4 mile times to expect? [Re: strokin73cuda] #376733 07/15/09 10:57 PM 07/15/09 10:57 PM
Joined: Mar 2008 Posts: 279 hartsburg mo B biggerredz71 enthusiast
biggerredz71 enthusiast B Joined: Mar 2008 Posts: 279 hartsburg mo	505,70RR,4200 stall,hughes cam 250-255 dur 576in 593 ex,source headed,victor intake,850dp,355 gears,stil wating to go to track as well.295-50-15 tires

Re: What 500ci combos and 1/4 mile times to expect? [Re: biggerredz71] #376734 07/16/09 12:26 AM 07/16/09 12:26 AM
Joined: Apr 2009 Posts: 228 northeast texas S strokin73cuda enthusiast
strokin73cuda enthusiast S Joined: Apr 2009 Posts: 228 northeast texas	Hyd roller @.50 mine is 246 in. 252 ex. 0n 112 lobe seperation .555 lift in. .548 lift ex. at cam 1.5 rockers my heads are eddy rpms otb intake ports the exhaut have been ported slightly, 1 7/8 hooker comp. 3"exhaust w muffs ross custom flattops 10.5 to 1 c.r. with 84 cc head 496 stroker stock converter 3.55s 315/50/15 M.T. drag radials my best so far 1/8 mile local track in the heat 1.73 60' 4.936 330' 7.588 660' @ 94 mph wallace caculaters translate that to 11.89 @ 116.56 and that will probably be pretty close I think the car does have a little more as I'm still working out a few small bugs with a little help from this site. 496 stroker,Indy srs , new best 6.87 @ 98 1.46 60'

Re: What 500ci combos and 1/4 mile times to expect? [Re: GoodfellaHenry70] #376735 07/16/09 01:11 AM 07/16/09 01:11 AM
Joined: Dec 2008 Posts: 742 Oak Harbor, WA W Wicked49670dart super stock
Wicked49670dart super stock W Joined: Dec 2008 Posts: 742 Oak Harbor, WA	My combo is a 383/496, 12.20:1, Hughes cam/valvetrain, Cam is 272@.050/.619 with 1.5 Hughes roller rockers with their hold down kit, Hughes stud girdle,Stage VI ported heads, ported Victor intake, Pro-Systems 4150 1000cfm carb and Nitrous Works plate system. Car weighes 3400 with me in it, runs 6.87@102.49 1/8th, 1.52 60 ft, 10.59@123 1/4 on motor, on NOS with bad tune-up (very rich as per Monte) 6.47@107.47, 1.41 60ft, 10.22@128 1/4. Looking for high 9'S with good tune-up on NOS as per Monte.....Matt 70 Dart 3400 496 New Best 6.15@110.37 660ft, 9.76@135 with a 1.34 60ft

Re: What 500ci combos and 1/4 mile times to expect? [Re: GoodfellaHenry70] #376736 07/16/09 01:29 AM 07/16/09 01:29 AM
Joined: Jul 2003 Posts: 1,107 Spring Valley ,Ca. moparsquid super stock
moparsquid super stock Joined: Jul 2003 Posts: 1,107 Spring Valley ,Ca.	im just about to fire mine up its got the eddy wdge heads 528 lift cam 11-1 comp max wedge intake with 2 600 holleys and a 2800 stall conv and 4-30s in a 62 dodge dart, ill stay in touch to let you know

Re: What 500ci combos and 1/4 mile times to expect? [Re: GoodfellaHenry70] #376737 07/16/09 07:09 AM 07/16/09 07:09 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: Hi guys, I have a 69 road runner with a new 496 stroker setup, auto, 2800 stall converter, running 275/60/15 Drag Radials and thinking about what kinda times I can run at the track. Not sure what gears to toss in, 3:55, 3:91, 4:10? I'm running a cam with about 550" lift and 285 duration, eddy aluminum heads, 1 7/8" headers and an eddy 800cfm for now. Looking to hear your similar based combos, with or without NOS, gears, specificly about and 1/4 times and mph. Thanks for your input Get a holley 850DP that eddy 800 won't be enough and you'll fade at 3/4 track, and 3.91 at least. What drag radials? if you tune is on and you run 3.91's you'll blow BFG's apart...Hoosier or ET street radials and you'll be ok. When you get it all sorted out it should run 11.80's or so maybe better. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: What 500ci combos and 1/4 mile times to expect? [Re: Mr.Yuck] #376738 07/16/09 07:53 AM 07/16/09 07:53 AM
Joined: Jan 2004 Posts: 877 Pittsburgh, Pa J Jeff_383 super stock
Jeff_383 super stock J Joined: Jan 2004 Posts: 877 Pittsburgh, Pa	I just took my Coronet to the track last week with a 500 inch with Eddy heads. Using a cam with 247/255 and 549/572 lift, 1 3/4 headers, 3000 stall, and 3:55's I went [Email]12.00@113[/Email] with regular 275/60 BFG street tires. Mind you this was the first time me or the car have ever been down the 1/4 mile. My car weighs 3975lbs. I'm sure if you use 3:55's with some drag radials you can drive easily to the track and run 11.80's at least.

Re: What 500ci combos and 1/4 mile times to expect? [Re: Jeff_383] #376739 07/16/09 09:03 AM 07/16/09 09:03 AM
Joined: Aug 2006 Posts: 662 Tampa FL H hemibeep mopar
hemibeep mopar H Joined: Aug 2006 Posts: 662 Tampa FL	275/60/15 BFG will not get it done on 69 runner with stock style suspension. if you can get 60' in the 1.70s look for 11.7-11.8 in 1/4. If you can squeeze 325/50s in, you might have a chance.

Re: What 500ci combos and 1/4 mile times to expect? [Re: GoodfellaHenry70] #376740 07/16/09 09:32 AM 07/16/09 09:32 AM
Joined: Aug 2005 Posts: 11,543 chicagoland,usa B buildanother I Live Here
buildanother I Live Here B Joined: Aug 2005 Posts: 11,543 chicagoland,usa	Had a 68 all steel coronet 499" w/525 comp hyd cam, stock eddy heads, 800 edelbrock, full tti system, 3.54 rear, 26" e/t streets, that would 60' 1.72, ran 12.20 @ 111, but was running out of fuel a wee bit down track. Weight approx 3900 w/driver.

Re: What 500ci combos and 1/4 mile times to expect? [Re: buildanother] #376741 07/16/09 09:53 AM 07/16/09 09:53 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: Had a 68 all steel coronet 499" w/525 comp hyd cam, stock eddy heads, 800 edelbrock, full tti system, 3.54 rear, 26" e/t streets, that would 60' 1.72, ran 12.20 @ 111, but was running out of fuel a wee bit down track. Weight approx 3900 w/driver. you can thank that weak carb for that. Put a DP on it and you'll be into the 11's easy. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: What 500ci combos and 1/4 mile times to expect? [Re: Mr.Yuck] #376742 07/16/09 10:40 AM 07/16/09 10:40 AM
Joined: Aug 2005 Posts: 11,543 chicagoland,usa B buildanother I Live Here
buildanother I Live Here B Joined: Aug 2005 Posts: 11,543 chicagoland,usa	Yeah, I was also using an elec pump, pulling fuel through the 5/16 fuel line through the stock pickup screen that was most likely never seen after car was built in 68. That car's(should of kept it) gone now anyways.

Re: What 500ci combos and 1/4 mile times to expect? [Re: buildanother] #376743 07/16/09 10:47 AM 07/16/09 10:47 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: Yeah, I was also using an elec pump, pulling fuel through the 5/16 fuel line through the stock pickup screen that was most likely never seen after car was built in 68. That car's(should of kept it) gone now anyways. 5/16 line is ok. Seen cars run low 11's w/ it, now a dirty sock 'aint gonna help. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: What 500ci combos and 1/4 mile times to expect? [Re: Mr.Yuck] #376744 07/16/09 11:13 AM 07/16/09 11:13 AM
Joined: Jan 2004 Posts: 877 Pittsburgh, Pa J Jeff_383 super stock
Jeff_383 super stock J Joined: Jan 2004 Posts: 877 Pittsburgh, Pa	I pulled a 1.80 60ft. with those street 275/60 BFG's and only SS springs.

Re: What 500ci combos and 1/4 mile times to expect? [Re: Jeff_383] #376745 07/16/09 11:53 AM 07/16/09 11:53 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: I pulled a 1.80 60ft. with those street 275/60 BFG's and only SS springs. with your set-up a good pair of DOT's would get you way into the 11's. I pulled 1.68 w/ ET streets on a 12.90 car. 1.80 is good for a mid 13 second car [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: What 500ci combos and 1/4 mile times to expect? [Re: Mr.Yuck] #376746 07/16/09 12:35 PM 07/16/09 12:35 PM
Joined: Jan 2004 Posts: 877 Pittsburgh, Pa J Jeff_383 super stock
Jeff_383 super stock J Joined: Jan 2004 Posts: 877 Pittsburgh, Pa	It's hard to judge what is a good or bad 60ft. for an E.T. I've seen shitty 60ft.'s end with fantastic E.T.'s I've also seen great 60ft.'s turn into turds at the other end. Some cars consistantly run bad 60ft's and run better than cars with good 60ft.'s. My real point is you don't always need to shove a monster tire in back to run good, even with basic combinations.

Re: What 500ci combos and 1/4 mile times to expect? [Re: Jeff_383] #376747 07/16/09 12:54 PM 07/16/09 12:54 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck Not enough dumb comments...yet
Mr.Yuck Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: It's hard to judge what is a good or bad 60ft. for an E.T. I've seen shitty 60ft.'s end with fantastic E.T.'s I've also seen great 60ft.'s turn into turds at the other end. Some cars consistantly run bad 60ft's and run better than cars with good 60ft.'s. My real point is you don't always need to shove a monster tire in back to run good, even with basic combinations. ture and since you have a 4 speed I'm not sure what you were dropping the hammer at. [IMG]http://i66.tinypic.com/pui5j.jpg[/IMG] Coming soon!!!!

Re: What 500ci combos and 1/4 mile times to expect? [Re: Mr.Yuck] #376748 07/16/09 02:40 PM 07/16/09 02:40 PM
Joined: Jan 2004 Posts: 877 Pittsburgh, Pa J Jeff_383 super stock
Jeff_383 super stock J Joined: Jan 2004 Posts: 877 Pittsburgh, Pa	No, I have an auto and idled out of the whole until about 30ft then gradualey floored it.

Re: What 500ci combos and 1/4 mile times to expect? [Re: Jeff_383] #376749 07/16/09 09:39 PM 07/16/09 09:39 PM
Joined: Mar 2005 Posts: 3,142 Central NC gch master
gch master Joined: Mar 2005 Posts: 3,142 Central NC	For a primarily street driven car I would run the 3.55's.Any more than that will not give you much if any E.T. gain on drag radials but your driveability will suffer unless you like spinning 3000-3500 rpm at 60-70mph on the freeway. The stroker makes so much torque you don't need to rpm it to death.Let the torque move you.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1