I ran the Super Bee at Maple Grove today with the new power plant put together by Dwayne Porter (fast68plymouth)for the F.A.S.T racing series. Based on a 383 platform for the car, Dwayne built a low deck motor that gave me a new personal best with the car... 12.07 @ 116.37 MPH in near 90 degree heat . On that run the 60' was 1.938. The new build is very docile at low speeds until you put your foot into it . Thanks Dwayne for all your efforts on the project. I am sure an 11 second run is in my future just as you planned.

Harry , 383 or 400 block ?

Way to go Harry!

Your in good hands with Dwayne

Ed

Congrats Harry!!

That'll be an 11 second ride next time out!

Wow, very nice !

Dwayne sure has a good handle on those FAST engine combos

Any pics of the car ?



Ron

Very impressive!

Can you tell us more about the car/engine/drive train? Is that a "301" intake and what modifications were done to it? What does the car weigh? Any pics?

do you run the larger 440 AVS, at the time I was invoilved with FAST I recall there was some "Grey Area" regarding whether the carb actually required the OEM casting number or if it only needed to look visually correct and functionally identical (IE, you couldn't swap a Vac sec for a Double pumper, etc) the 340/383 AVS is a good 75-100cfm smaller than the 440, it was the first swap (along with the old MP "jetting tips" we used to make way back when

I had a "magic" 69 440 AVS that ran within about .02 of a 750 double pumper on any motor I ran it on...wish I still had that one.

Your Bee is really buzzin' Harry. Not sure you know but I really root for the underdog.Dwayne did right by you,but that is how he is.Congrats it'll go better

With that MPH it shows you have the power for a 11.70 or there abouts.

Nice job Harry..

i am rooting for you to be the first low deck 4V into the 11's. I know you can do it ...



MB

Congrats Harry! Your right, it was HOT and your car ran well. 11`s will be no problem at all..

Congrats Harry and Dwayne

I finished up the season at VMP... I got the Super Bee into the elevens finally.

11.83 @ 117.44 MPH / 1.92 60ft

I plan on running this car next year hoping to improve on the 60 ft. with the bias ply tires. Wish me luck.

I wanted to thank every one again who helped.

R&D- Porter Racing heads
Machine work- Dale Spooner, Danville VA
Heads- Porter racing heads
Assembly/dyno/tuning- Porter Racing heads
Transmission-ATI
Converter-ATI (Specially built for the FAST class)
Drive Shaft- Drive-Line Specialist, Newington, VA
Rearend- Gary,at the college

Thanks Dwayne, This Car really boogies

Congrats Harry and Good Luck next year

Sounds like a GREAT combo!!

I wanna do that SO bad!!

Congrats!

Dave

I guess you could say Mr. Porter is just a tad crafty with those F.A.S.T. combos.

Congrats on 11's in a B-motor B-body!

BTW, I'm kinda' interested in some of how those suspensions manage to hook up on teeny-tiny tires.

If y'all can do it, there may be hope for me keeping the 235/75/$15s on my pickup.

-Bill