Go Wing paint?
#2568333
10/23/18 01:38 PM
10/23/18 01:38 PM
|
Joined: Aug 2004
Posts: 2,092 New Mexico
JMCFAN
OP
top fuel
|
OP
top fuel
Joined: Aug 2004
Posts: 2,092
New Mexico
|
Ordered a concours wing from Dantes. It comes in black primer... Correct paint is organsal..??
68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT
|
|
|
Re: Go Wing paint?
[Re: Pacnorthcuda]
#2568476
10/23/18 05:50 PM
10/23/18 05:50 PM
|
Joined: Aug 2004
Posts: 2,092 New Mexico
JMCFAN
OP
top fuel
|
OP
top fuel
Joined: Aug 2004
Posts: 2,092
New Mexico
|
Organisol. Lot of different ways to get a very CLOSE finish, fewer that are absolutely correct. Like...?
68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT
|
|
|
Re: Go Wing paint?
[Re: JMCFAN]
#2568499
10/23/18 06:30 PM
10/23/18 06:30 PM
|
Joined: Nov 2007
Posts: 21,823 Kirkland, Washington
Pacnorthcuda
Too Many Posts
|
Too Many Posts
Joined: Nov 2007
Posts: 21,823
Kirkland, Washington
|
Organisol. Lot of different ways to get a very CLOSE finish, fewer that are absolutely correct. Like...? Well, many years ago I tried a PPG formula for Organisol that uses a certain percentage of a flattening agent and a grit additive---I didn't like it. I ended up spraying samples of rattle can semi gloss, semi flat, satin etc looking for something I liked. Eventually I used Total Auto's rattle can product (kinda spendy, for cans, but their stuff is very much a specialty product) and was pleased with the result.
|
|
|
Re: Go Wing paint?
[Re: Little Detroit]
#2568568
10/23/18 09:04 PM
10/23/18 09:04 PM
|
Joined: Aug 2004
Posts: 2,092 New Mexico
JMCFAN
OP
top fuel
|
OP
top fuel
Joined: Aug 2004
Posts: 2,092
New Mexico
|
actually , the wing is not supposed to be painted, if your want to be absolutely correct original. however if the finish is not acceptable you have 2 choices, either paint it with whatever satin or semi gloss single stage paint( clear will make it glossy.) or you carefully wet sand the plastic with 1500,2000,2500,AND THEN polish the plastic wing until you receive the finish you desire.depending on the "original " detail you desire , be careful when sanding away any molding seams if you are looking for oem detail. just my version, but if no repairs are needed then wet sand and polish is my best thought, but then again im seeing what you are seeing. So leave in supplied black primer..?
68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT
|
|
|
Re: Go Wing paint?
[Re: Little Detroit]
#2568677
10/24/18 12:36 AM
10/24/18 12:36 AM
|
Joined: Dec 2007
Posts: 18,157 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,157
Mass
|
actually , the wing is not supposed to be painted, if your want to be absolutely correct original. however if the finish is not acceptable you have 2 choices, either paint it with whatever satin or semi gloss single stage paint( clear will make it glossy.) or you carefully wet sand the plastic with 1500,2000,2500,AND THEN polish the plastic wing until you receive the finish you desire.depending on the "original " detail you desire , be careful when sanding away any molding seams if you are looking for oem detail. just my version, but if no repairs are needed then wet sand and polish is my best thought, but then again im seeing what you are seeing. I was under the impression the GO WING (70-early 71 application) is painted, and the GULL WING (71 application) is "smooth" as molded plastic finish?
|
|
|
Re: Go Wing paint?
[Re: Little Detroit]
#2568814
10/24/18 12:32 PM
10/24/18 12:32 PM
|
Joined: Aug 2004
Posts: 2,092 New Mexico
JMCFAN
OP
top fuel
|
OP
top fuel
Joined: Aug 2004
Posts: 2,092
New Mexico
|
Should have specified early... mine is for 70 Roadrunner
68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT
|
|
|
|
|