Topic Options
#2436841 - 01/18/18 11:15 AM Baer master cylinder
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 25183
Loc: Oregon
Baer is now selling a billet master cylinder with a built in prop valve. The MC is available in three different bore sizes and a couple of different flanges.

The Ford/GM flange fits the two bolt adapters that I make. In the picture I'm using an AR060 offset MC adapter which is a common part that Mancini Racing carries.

If you're looking for a new master cylinder or want to clean up your firewall area with an integrated prop valve then this might be an option for you.


Attachments
DSC_1975 (Large).JPG

DSC_1972 (Large).JPG



Top
#2436882 - 01/18/18 12:26 PM Re: Baer master cylinder [Re: AndyF]
krautrock Offline
top fuel

Registered: 01/27/03
Posts: 1796
Loc: central texas
that's a nice looking master cylinder there.

i used one of they mounting brackets to mount a proportioning valve under the MC on my car..

http://baer.com/Adjustable-Proportioning-Valve-Bracket.html

Top
#2437537 - 01/19/18 01:08 PM Re: Baer master cylinder [Re: AndyF]
Mopar Mitch Offline
super stock

Registered: 01/17/10
Posts: 1073
Loc: NW Chicago suburban area
Can it be used/adapted with a factory power booster (72 e-body). Looks good! cost?
_________________________
Mopar Mitch "Road racers and autocrossers go in deeper and come out harder!"... and rain never stops us from having fun with our cars... in fact, it makes us better drivers! Check out MOPAR ACTION MAGAZINE, August 2006 issue for feature article and specs on my autocross T/A!

Top
#2443994 - 01/31/18 09:31 AM Re: Baer master cylinder [Re: Mopar Mitch]
Jeremiah Offline
master

Registered: 03/03/03
Posts: 8188
Loc: Rogue River, OR
I ordered a black 1" bore from the scratch and dent, thanks for the heads up Andy.

This will help with j-bar placement in the engine compartment with the offset adapter. I really hate the look of the Wilwood m/c so this is a breath of fresh air IMO.

Top
#2583552 - 11/27/18 12:04 AM Re: Baer master cylinder [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 25183
Loc: Oregon
Got the new brake lines run. The front line goes to the line lock then to the distribution block. The rear line just goes to the distribution block.

I also ordered new brake lines from Inline Tube. The new brake lines fit pretty well and they came with a new distribution block. I have four wheel disc brakes on this car so I probably don't need the built in prop valve that comes with the Baer master cylinder but I'm going to at least give it a try and see how it goes.


Attachments
DSC_3146 (Large).JPG



Top
#2583554 - 11/27/18 12:06 AM Re: Baer master cylinder [Re: AndyF]
AndyF Offline
Too Many Posts

Registered: 01/20/03
Posts: 25183
Loc: Oregon
Here is another view. If you look past all the clutter you can see the new distribution block and how the brake lines are run from the master cylinder.

The kit I bought from Inline Tube had new lines that were pre-bent for a Mopar disc brake MC but of course those lines didn't fit the Baer MC. Add in the line lock and I needed some custom lines bent up.


Attachments
DSC_3145 (Large).JPG



Top
#2583572 - 11/27/18 01:22 AM Re: Baer master cylinder [Re: AndyF]
Car Nut Offline


Registered: 04/06/14
Posts: 571
Loc: Zombieland
Here's mine mocked up in Black.


Attachments
4753A6B4-0963-4B8B-9661-DFBC1FA5FF49 (2).jpeg



Top
#2583591 - 11/27/18 07:04 AM Re: Baer master cylinder [Re: AndyF]
GoodysGotaCuda Offline
5.7L Hemi, 6spd

Registered: 11/23/04
Posts: 24583
Loc: Texas
Wilwood sells a setup that packages pretty well too. Prebent lines and bracket


Attachments
20374251_1618114131565972_8805545717859181155_n-2.jpg


_________________________
1972 Barracuda - 5.7L Hemi, T56 Magnum 6spd - https://www.facebook.com/GoodysGotaHemi
1976 Dodge Warlock - "Her Truck" - 360/727 2wd
1969 Dodge Dart Custom Sedan - 318/904
2016 Subaru WRX - E30 Tune ~320whp

Top
#2591851 - 12/14/18 11:26 AM Re: Baer master cylinder [Re: AndyF]
mopardude318 Offline
enthusiast

Registered: 12/05/09
Posts: 266
Loc: Gilroy,CA.
Nice work Andy!

GoodysCuda, I'd like to see more of your hydraulic clutch system. The pedal side too please.
I went with the wilwood setup as the Baer wasn't available. Bent my own lines. I'm not good at bending and making lines.







Edited by mopardude318 (12/14/18 11:28 AM)
_________________________
408 Stroker 533 HP 520 FT LBS...........................1970 Dart RMS AlterKation

Top
#2591863 - 12/14/18 11:48 AM Re: Baer master cylinder [Re: AndyF]
Supercuda Offline
I want my mommy!!

Registered: 09/04/07
Posts: 14345
Loc: up yours
Ever wonder why the factory puts those loops on the brake lines? So the brake lines don't work harden from vibration and crack.
_________________________
They say there are no such thing as a stupid question.
They say there is always the exception that proves the rule.
Don't be the exception.

Top
#2591982 - 12/14/18 03:51 PM Re: Baer master cylinder [Re: AndyF]
BigBlockMopar Offline
master

Registered: 01/22/03
Posts: 3437
Loc: The Netherlands
I agree.
A master cylinder can move a significant amount when you use the brakes (firmly).
That area of the firewall, eventhough reinforced a bit, isn't strong enought to resist all the brakepedal-forces.

Also, later models have rubber body mounts, which adds another movement-factor between firewall and chassis.
_________________________
BigBlockMopar.com


Top
#2592607 - 12/15/18 09:38 PM Re: Baer master cylinder [Re: mopardude318]
GoodysGotaCuda Offline
5.7L Hemi, 6spd

Registered: 11/23/04
Posts: 24583
Loc: Texas
Originally Posted By mopardude318
Nice work Andy!

GoodysCuda, I'd like to see more of your hydraulic clutch system. The pedal side too please.
I went with the wilwood setup as the Baer wasn't available. Bent my own lines. I'm not good at bending and making lines.


I'll have to pull some together, I don't have any on hand.

I put an extra hole/nutsert in the wilwood prop valve bracket and have a bracket that runs around the bottom of the m/c to mount my clutch reservoir.

The clutch master, lines, mount and pedal pushrod all comes from SST
_________________________
1972 Barracuda - 5.7L Hemi, T56 Magnum 6spd - https://www.facebook.com/GoodysGotaHemi
1976 Dodge Warlock - "Her Truck" - 360/727 2wd
1969 Dodge Dart Custom Sedan - 318/904
2016 Subaru WRX - E30 Tune ~320whp

Top

Advertisement
Forum Stats
25,702 Registered Members
32 Forums
196,789 Topics
2,305,988 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
57 Belvedere - a few fixes
by mopardwh
01/20/19 11:46 PM
Anyone else watching the lunar eclipse tonight?
by Alaskan_TA
01/20/19 10:56 PM
Any Ford Techs on here?
by oldjonny
01/20/19 10:06 PM
Hot Rod Power Tour 2019 (MoPowered Tour)
by Devil
01/20/19 09:53 PM