Project Zoom Me - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Project Zoom Me

Print Thread

Page 4 of 5

1

2

3

4

5

Re: Project Zoom Me [Re: Cab_Burge] #2300635 05/07/17 12:23 PM 05/07/17 12:23 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	Originally Posted By Cab_Burge I have a friend who has ruled the west coast 10.5 PSCA class, he defines the amount of boost as the amount of resistance to airflow His old Pro Charged motor ran with 35 lbs. of boost as well as with twin 88MM turbo, he swore his SB Ford heads flowed 430 + CFM at .700 lift He ran 6.87 at 195 MPH 5 years ago on those tires with that motor My local competition is pretty tough, I spoke to one guy here at Milan, he says he is running 75 lbs of boost on his 481X, sounds insane to me. He just ran a 4.02 @196 down south the other month. Most boosted cars on radials around here run 40-45 LBS

Re: Project Zoom Me [Re: 590 Challenger] #2304235 05/14/17 11:20 AM 05/14/17 11:20 AM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	I got it out, Having trouble with the engine cutting out, starts breaking up about 4,900, will not rev past 5,200. Short shifted at 4800 (instead of 6900) broke up on the top end for best pass of the day of 5.24 129MPH. So much more left in it

Re: Project Zoom Me [Re: 590 Challenger] #2304241 05/14/17 11:37 AM 05/14/17 11:37 AM
Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina sgcuda master
sgcuda master Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina	Just plain Bad Ass! Good luck finding the problem. It's early in the season. [image][/image]

Re: Project Zoom Me [Re: 590 Challenger] #2304318 05/14/17 02:04 PM 05/14/17 02:04 PM
Joined: Jan 2008 Posts: 2,363 Cotati, CA Dave Hall top fuel
Dave Hall top fuel Joined: Jan 2008 Posts: 2,363 Cotati, CA	Glad that you got it out. Sounds like your Grid is pulling timing or a rev limit is being activated somehow?

Re: Project Zoom Me [Re: 590 Challenger] #2304322 05/14/17 02:07 PM 05/14/17 02:07 PM
Joined: Jan 2003 Posts: 17,918 Akron, Ohio ProSport I Live Here
ProSport I Live Here Joined: Jan 2003 Posts: 17,918 Akron, Ohio	Car looks amazing! 1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual

Re: Project Zoom Me [Re: 590 Challenger] #2304365 05/14/17 03:30 PM 05/14/17 03:30 PM
Joined: Aug 2003 Posts: 43,144 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,144 Bend,OR USA	Try closing up the spark plug gap down to .010 to .015 to get rid of the high speed miss I've got a weird miss I'm chasing on my bracket car on E85, I wll conquer it Last edited by Cab_Burge; 05/14/17 03:31 PM. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: Project Zoom Me [Re: 590 Challenger] #2304485 05/14/17 08:09 PM 05/14/17 08:09 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	Thanks Guys! I'm still pumped. I changed the rev limiter twice had no effect. Spark plug gap is at .025, with the ProMag 44 and alcohol I have been told that is where it needs to be......??? Do you run mags at 10-15 gap? is anyone running that combo tighter?

Re: Project Zoom Me [Re: 590 Challenger] #2304542 05/14/17 10:21 PM 05/14/17 10:21 PM
Joined: Aug 2003 Posts: 43,144 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,144 Bend,OR USA	That guy I mentioned had his Pro Mag 44 amp plugs gap at .015 and then .010 when they turned the boost up on the BAE aluminum all billet motor They had to replace the coil wire a lot more often with that big amp mag also along with the spark plug wires more often than twice a year Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: Project Zoom Me [Re: 590 Challenger] #2304571 05/14/17 10:49 PM 05/14/17 10:49 PM
Joined: Jan 2008 Posts: 2,363 Cotati, CA Dave Hall top fuel
Dave Hall top fuel Joined: Jan 2008 Posts: 2,363 Cotati, CA	Heard that from my BAE buddys!

Re: Project Zoom Me [Re: 590 Challenger] #2304617 05/14/17 11:59 PM 05/14/17 11:59 PM
Joined: Jan 2003 Posts: 8,022 Tulsa OK Bad340fish master
Bad340fish master Joined: Jan 2003 Posts: 8,022 Tulsa OK	Did you have to make any tuning changes for the header change? I wonder if it leaned out some with the new Zoomies? Looks killer! 68 Barracuda Formula S 340

Re: Project Zoom Me [Re: 590 Challenger] #2304738 05/15/17 09:14 AM 05/15/17 09:14 AM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	I had no fuel mixture change after adding the zoomies but the plugs don't look like they are getting too much heat. Next time out I will tighten up the spark gap and see what happens

Re: Project Zoom Me [Re: 590 Challenger] #2306338 05/17/17 10:04 PM 05/17/17 10:04 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	Just thought I would toss this out , When we get it right she is going to scream. Even not running right I'm having a blast!! https://www.facebook.com/photo.php?fbid=...4793&type=3

Re: Project Zoom Me [Re: 590 Challenger] #2306339 05/17/17 10:08 PM 05/17/17 10:08 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	Crap, that didn't work.....try try again https://www.facebook.com/photo.php?fbid=...4793&type=3

Re: Project Zoom Me [Re: 590 Challenger] #2306341 05/17/17 10:09 PM 05/17/17 10:09 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	I give, no video today

Re: Project Zoom Me [Re: 590 Challenger] #2306342 05/17/17 10:10 PM 05/17/17 10:10 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	https://www.facebook.com/100008950174793/videos/1667984750176515/

Re: Project Zoom Me [Re: 590 Challenger] #2308359 05/21/17 08:38 AM 05/21/17 08:38 AM
Joined: Jan 2003 Posts: 4,048 Shelby Twp. Mi HardcoreB master
HardcoreB master Joined: Jan 2003 Posts: 4,048 Shelby Twp. Mi	Nice work again Jeff, unfortunately I couldn't make it out Friday to see. As you said, it will really fly, just keep on your pace. Good to see you are making progress. Impressive!

Re: Project Zoom Me [Re: 590 Challenger] #2432317 01/10/18 05:18 PM 01/10/18 05:18 PM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	I'm pretty pumped, I went to SSI and picked up a blower last night. This one should put out 40-45 PSI with a much cooler charge. I'm down sizing from 590 cubes to 528 on the Hemi......I can't wait to try it out, come on spring!!!! https://imgur.com/InueUvB https://imgur.com/8RGveBK

Re: Project Zoom Me [Re: 590 Challenger] #2432651 01/11/18 03:01 AM 01/11/18 03:01 AM
S Superfreak Unregistered
Superfreak Unregistered S	You will definitely make a lot more power.

Re: Project Zoom Me [Re: 590 Challenger] #2432661 01/11/18 03:56 AM 01/11/18 03:56 AM
Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge FastmOp master
FastmOp master Joined: Jan 2003 Posts: 5,762 Hot Rod Ridge	The blower pics on facebook are sexy

Re: Project Zoom Me [Re: 590 Challenger] #2432737 01/11/18 10:45 AM 01/11/18 10:45 AM
Joined: Jan 2015 Posts: 493 Parts unknown 5 590 Challenger OP mopar
590 Challenger OP mopar 5 Joined: Jan 2015 Posts: 493 Parts unknown	Yeah thanks, I couldn't get the imgur oic thing working right yesterday

Page 4 of 5

1

2

3

4

5

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1