Re: Single Serpentine Belt
[Re: srunge55]
#2428042
01/02/18 11:32 PM
01/02/18 11:32 PM
|
Joined: Jan 2005
Posts: 2,540 Milwaukee WI
TRENDZ
master
|
master
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
|
serp belts need a good amount of wrap. I would guess that it would work. Only one way to find out! You could always add idlers if it doesn't work.
"use it 'till it breaks, replace as needed"
|
|
|
Re: Single Serpentine Belt
[Re: srunge55]
#2428119
01/03/18 02:15 AM
01/03/18 02:15 AM
|
Joined: Jan 2003
Posts: 1,807 North Dakota
Azzkikrcuda
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,807
North Dakota
|
I used the water pump and crank pulleys from March. The power steering pulley from a 90's Chevy 350 pick up. Alternator pulley from a 90's Ford V6. I used stock unmodified alternator and PS pump brackets and everything lined up ok. Just made brackets for the idlers, simple and works good.
The only Carbs I care about are under the hood!
|
|
|
Re: Single Serpentine Belt
[Re: srunge55]
#2428245
01/03/18 12:55 PM
01/03/18 12:55 PM
|
Joined: Jan 2003
Posts: 19,361 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,361
Las Vegas
|
We use a single serpentine on the heads up car. Runs the alternator(yes we have one) vacuum pump all driven by the crank. Motor sees 10,000rpm on pretty much every pass with zero issues.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
Re: Single Serpentine Belt
[Re: srunge55]
#2428368
01/03/18 04:43 PM
01/03/18 04:43 PM
|
Joined: Jan 2003
Posts: 1,807 North Dakota
Azzkikrcuda
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,807
North Dakota
|
Stock power steering belt sits out in front of the wp/alternator towards the end of the ps pump shaft. The GM pulley has the belt in towards the pump housing. You just have to switch to the later press on shaft ps pump, mine was off a 77 Aspen. If you are using the stock mopar alternator you can get that pulley from March also. March crank pulley 10301, Water pump pulley 10312, Stock mopar alternator pulley 214
The only Carbs I care about are under the hood!
|
|
|
Re: Single Serpentine Belt
[Re: srunge55]
#2428387
01/03/18 05:40 PM
01/03/18 05:40 PM
|
Joined: Sep 2007
Posts: 1,890 Spahn Ranch
RMCHRGR
top fuel
|
top fuel
Joined: Sep 2007
Posts: 1,890
Spahn Ranch
|
Excuse the crummy pic but here's mine. No tensioner, it's installed like a regular v belt. No issues. It used to drive the water pump before I got an electric one.
'71 Duster '17 Ram 1500
|
|
|
|
|