Topic Options
#2401414 - 11/10/17 12:17 PM TQ plastic section
cudaman1969 Online   sleepy
master

Registered: 01/25/04
Posts: 3646
Loc: fredericksburg,va
Anybody know what glue-epoxy is used to fix the jet wells back on to the Thermoquad bowl? (Where it sticks down into the base plate) White looking mixture from the factory.

Top
#2401576 - 11/10/17 06:02 PM Re: TQ plastic section [Re: cudaman1969]
Cab_Burge Offline
Too Many Posts

Registered: 08/23/03
Posts: 29562
Loc: Bend,OR USA
I was told to use five minute epoxy years ago on anything in the cabs dealing with fuel, it worked up
_________________________
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Top
#2401676 - 11/10/17 09:02 PM Re: TQ plastic section [Re: cudaman1969]
LAD 524 Offline
mopar

Registered: 09/22/05
Posts: 436
Loc: Oz
JB Weld wink

Top
#2401684 - 11/10/17 09:20 PM Re: TQ plastic section [Re: cudaman1969]
SCATPACK 1 Offline
pro stock

Registered: 04/30/05
Posts: 1353
Loc: TN
JB weld dissolves in modern gas w alky. I used it on a gas tank where I added an additional outlet gas line. It lasted about 6 months and was completely loose.


Edited by SCATPACK 1 (11/13/17 12:39 PM)
_________________________
Old Geezer Racing

Top
#2401777 - 11/11/17 06:12 AM Re: TQ plastic section [Re: cudaman1969]
quickd100 Offline
master

Registered: 01/20/03
Posts: 6112
Loc: nielsville, minn.
Try marinetex.
_________________________
Speak softly and carry a BIG (605) STICK

Top
#2401856 - 11/11/17 09:47 AM Re: TQ plastic section [Re: quickd100]
moparx Offline
master

Registered: 09/03/03
Posts: 7935
Loc: north of coder
i was perusing the JB selection at the local ACE hardware the other day, and was surprised at the different formulas they have now for various applications. i think i saw a couple that stated they were impervious to gasoline, but i don't remember which formula they were.
beer

Top
#2402297 - 11/11/17 09:56 PM Re: TQ plastic section [Re: cudaman1969]
A/MP Offline
mopar

Registered: 10/09/08
Posts: 512
Loc: East Coast
Loctite Epoxy Bond and Moroso head epoxy. You need to create a mechanical tooth on all surfaces. Also don't worry only about ethanol in pump gas. The main culprit in pump gas is BTEX. Benzene,toluene, and xylene are cheap additives in most pump gas. Alone they attack plastics and gasoline hose. As a group they are very nasty.

Top
#2402876 - 11/12/17 11:03 PM Re: TQ plastic section [Re: cudaman1969]
LAD 524 Offline
mopar

Registered: 09/22/05
Posts: 436
Loc: Oz
We have less corrosive fuel down here it seems wink

Top
#2402931 - 11/13/17 08:36 AM Re: TQ plastic section [Re: cudaman1969]
A/MP Offline
mopar

Registered: 10/09/08
Posts: 512
Loc: East Coast
One note specifically about plastics. Some plastics are hard and others are soft. They all have have a vapor pressure that slowly breaks the chemical bonding. Everything is subject to it. Put that plastic in an environment that is subject to heat cycles and numerous petro chemicals and you will destroy it faster. Call Barry Grant. They are now making a TQ carb-3 BBL. See what they recommend for their phenolic bowl repair.

Top
#2402997 - 11/13/17 10:46 AM Re: TQ plastic section [Re: cudaman1969]
Thumperdart Offline


Registered: 07/12/04
Posts: 18161
Loc: State of confusion
I'v ground/filed the factory epoxy off and used JB Weld and never any issues........... thumbs
_________________________
72 Dart 470 n/a BB stroker street car `THUMPER`..9 seconds of fun...Check me out on FB for stories, videos and lots of carb pics..........760-900-3895........

Top

Advertisement
Sponsored Link
Forum Stats
24,964 Registered Members
32 Forums
185,412 Topics
2,148,821 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
BLOCK CLEARANCING w/bryant 4.375" crank and stock HEMI rods
by domingo
11/23/17 03:23 PM
Working today to stay away from the family libs anyone else
by cudaman1969
11/23/17 03:19 PM
1200-1500hp - World iron hemi block?
by Superfreak
11/23/17 03:14 PM
Summit Black Friday Cyper Monday sale
by pittsburghracer
11/23/17 02:45 PM