My new street/strip 74 dart sport
#2269704
03/15/17 12:10 AM
03/15/17 12:10 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Hi every one. I haven't made a race car post on her in a few years. Had to get out of the game for a few years.but I am back.lol well I am buying a tubed out 1974 dart sport, used to be a old race car. But I am going to be making a street/strip car out of it. But have a few questions. The car has a mustang II front end. I know it's kind of old school, but what do you think about the set up? Is anybody still using it? I will be installing the engine/trans out of a 2000 dodge Durango with the 5.9. I will also be installing the factory fuel injection. Second question. I am going to have to weld in a set of motor mounts or run a motor plate. I would just run a engine plate, sounds like it would be lots easier. But I wanted to run the factory magnum belt set up and it looks like I will loose it if I run the engine plate. Does anybody make a weld on motor mount kit or is it fab time. Here is a pic of the car. Thanks mopar6r
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2269769
03/15/17 01:37 AM
03/15/17 01:37 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Looks decent.. I have a mustang II front end on my 38 Ply.. works fine.. mine even has power steering
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2269800
03/15/17 03:07 AM
03/15/17 03:07 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Thanks Mike. If I have any trouble with it can I ask you questions about it? Also I might have some trans questions for ya. Did you ever race your rampage down the 1/4 mile? If so what did it run?
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2269948
03/15/17 01:20 PM
03/15/17 01:20 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Thanks Mike. If I have any trouble with it can I ask you questions about it? Also I might have some trans questions for ya. Did you ever race your rampage down the 1/4 mile? If so what did it run? Sure you can.. I havent raced it on the true 1/4 mile.. just on the road in front of my place(I have a 1/4 mile marked out on the road)I used my G-force meter to give me a rough idea
|
|
|
Re: My new street/strip 74 dart sport
[Re: cudadoug]
#2269970
03/15/17 02:00 PM
03/15/17 02:00 PM
|
Joined: Feb 2005
Posts: 20,185 PA.
pittsburghracer
"Little"John
|
"Little"John
Joined: Feb 2005
Posts: 20,185
PA.
|
Looks like fun. Enjoy the road back
1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27
Livin and lovin life one day at a time
|
|
|
Re: My new street/strip 74 dart sport
[Re: Thumperdart]
#2270321
03/16/17 12:30 AM
03/16/17 12:30 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
[quote=Thumperdart]Welcome back and cool project car.............. [/quote Thanks Dom. It's great to be back. It going to take me a long time to get my car the way I want it. So for now it's going to be more of a slow street car.lol
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2270330
03/16/17 12:41 AM
03/16/17 12:41 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Thanks Mike. If I have any trouble with it can I ask you questions about it? Also I might have some trans questions for ya. Did you ever race your rampage down the 1/4 mile? If so what did it run? Sure you can.. I havent raced it on the true 1/4 mile.. just on the road in front of my place(I have a 1/4 mile marked out on the road)I used my G-force meter to give me a rough idea Thanks Mike. I have never messed with the mustang II stuff. So will be looking for advice etc on it. I want to use the 46RE over drive trans with lock up converter. Just haven't found out if you can get one with higher than stock stall yet.
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: ProSport]
#2270332
03/16/17 12:42 AM
03/16/17 12:42 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Thanks Bob. I think your duster looks amazing and would love to have one just like it. Have you made a pass down the track yet?
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: cudadoug]
#2270334
03/16/17 12:43 AM
03/16/17 12:43 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Welcome back and cool project car.............. Ditto! Thanks you
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: pittsburghracer]
#2270336
03/16/17 12:44 AM
03/16/17 12:44 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Looks like fun. Enjoy the road back Thanks. I think a lot of fun will be getting the engine in etc and getting the car runing.
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2270342
03/16/17 12:57 AM
03/16/17 12:57 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Thanks Mike. If I have any trouble with it can I ask you questions about it? Also I might have some trans questions for ya. Did you ever race your rampage down the 1/4 mile? If so what did it run? Sure you can.. I havent raced it on the true 1/4 mile.. just on the road in front of my place(I have a 1/4 mile marked out on the road)I used my G-force meter to give me a rough idea Thanks Mike. I have never messed with the mustang II stuff. So will be looking for advice etc on it. I want to use the 46RE over drive trans with lock up converter. Just haven't found out if you can get one with higher than stock stall yet. What I did was change input shaft and pump assembly so I could put a high stall conc in.. I'm running a 4.10 gear with with the OD trans.. I shut the OD off when racing.. that way I get the max rpm for racing... thats with a 4800 rpm stall... with the OD on I can cruise at 2900 rpm at 75 mph
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2270349
03/16/17 01:15 AM
03/16/17 01:15 AM
|
Joined: Jan 2005
Posts: 4,243 Charlotte, North Carolina
sgcuda
master
|
master
Joined: Jan 2005
Posts: 4,243
Charlotte, North Carolina
|
Looks like a cool project. Mustang II front ends are pretty solid pieces. I don't think fabbing up some motor mounts would be that big a deal.
[image][/image]
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2270430
03/16/17 10:10 AM
03/16/17 10:10 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Thanks Mike. If I have any trouble with it can I ask you questions about it? Also I might have some trans questions for ya. Did you ever race your rampage down the 1/4 mile? If so what did it run? Sure you can.. I havent raced it on the true 1/4 mile.. just on the road in front of my place(I have a 1/4 mile marked out on the road)I used my G-force meter to give me a rough idea Thanks Mike. I have never messed with the mustang II stuff. So will be looking for advice etc on it. I want to use the 46RE over drive trans with lock up converter. Just haven't found out if you can get one with higher than stock stall yet. What I did was change input shaft and pump assembly so I could put a high stall conc in.. I'm running a 4.10 gear with with the OD trans.. I shut the OD off when racing.. that way I get the max rpm for racing... thats with a 4800 rpm stall... with the OD on I can cruise at 2900 rpm at 75 mph Sounds great Mike. So did you just use a pump and input shaft out of a 727? Also I think I have enough alto red racing clutches left over from my 727 build. Can I use them in the 46RE? I just have to buy the steels.
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: sgcuda]
#2270431
03/16/17 10:13 AM
03/16/17 10:13 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Looks like a cool project. Mustang II front ends are pretty solid pieces. I don't think fabbing up some motor mounts would be that big a deal. Have any recommendations on mounts ? I have a V8 spool mount k frame I was thinking about cutting the mounts off of. The k frame it self is junk. But the engine mounts are still good.
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2270436
03/16/17 10:27 AM
03/16/17 10:27 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Yeah... I just changed the input shaft and the pump to fit a 727 conv.. as to the frictions and steels.. I cant say for sure.. 727 parts are a little smaller than the parts in my 518... it will be easy enough to find out
Last edited by MR_P_BODY; 03/16/17 10:28 AM.
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2270817
03/16/17 10:06 PM
03/16/17 10:06 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Yeah... I just changed the input shaft and the pump to fit a 727 conv.. as to the frictions and steels.. I cant say for sure.. 727 parts are a little smaller than the parts in my 518... it will be easy enough to find out Mike is there a certain pump and input shaft I should look for? I think I have a left over pump and input shaft from a 71/74 727 I could use.what did you use for a valve body?
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2270828
03/16/17 10:24 PM
03/16/17 10:24 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Just a 727 and input shaft I used the stock 518 valve body
Last edited by MR_P_BODY; 03/16/17 10:26 PM.
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2270835
03/16/17 10:32 PM
03/16/17 10:32 PM
|
Joined: Dec 2005
Posts: 11,611 Fulton County, PA
CMcAllister
Mr. Helpful
|
Mr. Helpful
Joined: Dec 2005
Posts: 11,611
Fulton County, PA
|
Nothing wrong with a Mustang II front end. What matters is the quality (or lack of) of the parts used and the skill/ability of the persons who installed it.
If the results don't match the theory, change the theory.
|
|
|
Re: My new street/strip 74 dart sport
[Re: CMcAllister]
#2270914
03/17/17 12:28 AM
03/17/17 12:28 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
The Mustang II unit I have is called(I think) Fat Man or something like that.. its suppose to be the best there is
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2271233
03/17/17 04:17 PM
03/17/17 04:17 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
The Mustang II unit I have is called(I think) Fat Man or something like that.. its suppose to be the best there is Mike I am not sure if mine was a kit or what?
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: tboomer]
#2272053
03/18/17 11:08 PM
03/18/17 11:08 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Nice to see ya back Bobby! Thanks Ted it's great to be back. Sorry to read all about the health problems you have had to deal with. Hope you get better soon and back to racing your 64
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2272224
03/19/17 11:07 AM
03/19/17 11:07 AM
|
Joined: Jan 2003
Posts: 4,296 Chicago, IL
TonyS451
master
|
master
Joined: Jan 2003
Posts: 4,296
Chicago, IL
|
Cool ride! I've always liked those Dart Sports. Enjoy!
2 kids and a dog
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2272302
03/19/17 01:05 PM
03/19/17 01:05 PM
|
Joined: Jan 2003
Posts: 17,918 Akron, Ohio
ProSport
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 17,918
Akron, Ohio
|
Thanks Bob. I think your duster looks amazing and would love to have one just like it. Have you made a pass down the track yet? Not yet, finally doing some upgrades now and hope to make a few passes this year.
1970 Challenger, all aluminum 528 Hemi, HDK suspension, Tremec 5 speed manual
|
|
|
Re: My new street/strip 74 dart sport
[Re: TonyS451]
#2273018
03/20/17 02:42 PM
03/20/17 02:42 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Cool ride! I've always liked those Dart Sports. Enjoy! Thanks tony. Are you building anything now?
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: ProSport]
#2273020
03/20/17 02:42 PM
03/20/17 02:42 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Thanks Bob. I think your duster looks amazing and would love to have one just like it. Have you made a pass down the track yet? Not yet, finally doing some upgrades now and hope to make a few passes this year. Well I can't wait to hear how it runs bob. Do you have any pics of your car
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2275361
03/24/17 01:06 PM
03/24/17 01:06 PM
|
Joined: Mar 2005
Posts: 1,552 Michigan
Kiddart
pro stock
|
pro stock
Joined: Mar 2005
Posts: 1,552
Michigan
|
I have to say I do love the Dart Sports, Heres Mine.
Welcome to the Club. If I would have known I would have made you a swinging deal on the roller or as turn-key.
Have fun and keep us posted would like to see more on the mustang II front end
Kiddart1
Last edited by Kiddart; 03/24/17 01:07 PM.
Thank you Kiddart
|
|
|
Re: My new street/strip 74 dart sport
[Re: Kiddart]
#2275510
03/24/17 06:45 PM
03/24/17 06:45 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
I have to say I do love the Dart Sports, Heres Mine.
Welcome to the Club. If I would have known I would have made you a swinging deal on the roller or as turn-key.
Have fun and keep us posted would like to see more on the mustang II front end
Kiddart1 Thanks for the kind words. But you probably will hate me after I tell you it's got a 73 duster frontend on it. Lol what your going to sell your car? It's very nice looking car
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2275521
03/24/17 07:00 PM
03/24/17 07:00 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
[/quote] Thanks for the kind words. But you probably will hate me after I tell you it's got a 73 duster frontend on it. Lol what your going to sell your car? It's very nice looking car [/quote] I didnt get out to the shop today.. I helped a buddy do a front end alignment on his hot rod.. I will get the pics tomorrow.. I did get a pile of parts for my junk today.. thanks to Trendz.. now I have to take the wife out to dinner
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2275641
03/24/17 11:09 PM
03/24/17 11:09 PM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Looking good there mike.keep the pics coming.yep got to keep the wife happy. Have a great dinner
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2275701
03/25/17 12:33 AM
03/25/17 12:33 AM
|
Joined: Jan 2004
Posts: 8,290 fredericksburg,va
cudaman1969
master
|
master
Joined: Jan 2004
Posts: 8,290
fredericksburg,va
|
The Mustang II unit I have is called(I think) Fat Man or something like that.. its suppose to be the best there is Mike I am not sure if mine was a kit or what? Do you have coil overs or just the Mustang springs on the front end? I had the Alston (Mustang copy) on a tube chassis Cuda went 125 mph no problem. Had tubular upper and lower arms with Koni coilovers. It still took awhile to get the bump steer right, even had to shorten the rack down 1-1/2. Very easy to line up. If the whole one piece setup was installed on yours, no problem
|
|
|
Re: My new street/strip 74 dart sport
[Re: cudaman1969]
#2275762
03/25/17 02:11 AM
03/25/17 02:11 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
The Mustang II unit I have is called(I think) Fat Man or something like that.. its suppose to be the best there is Mike I am not sure if mine was a kit or what? Do you have coil overs or just the Mustang springs on the front end? I had the Alston (Mustang copy) on a tube chassis Cuda went 125 mph no problem. Had tubular upper and lower arms with Koni coilovers. It still took awhile to get the bump steer right, even had to shorten the rack down 1-1/2. Very easy to line up. If the whole one piece setup was installed on yours, no problem Hi mine has adjustable coil overs. Mine has what looks like the stock mustang II upper and lower control arms. I found a set of tubberler arms I am going to get for it
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
Re: My new street/strip 74 dart sport
[Re: mopar65]
#2275768
03/25/17 02:30 AM
03/25/17 02:30 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Mine is on the front end of my 38 Ply.. I'm gonna pull the 440 out and out in a gen3 to get the front lighter.. I'm still working on it but its on the back burner till I get the Rampage done so I can put the time into it.. I've had the interior out of it 3 times now.. not happy... I have a little over $1200 to do in chrome work to do yet
Last edited by MR_P_BODY; 03/25/17 02:39 AM.
|
|
|
Re: My new street/strip 74 dart sport
[Re: MR_P_BODY]
#2275874
03/25/17 11:30 AM
03/25/17 11:30 AM
|
Joined: Jan 2004
Posts: 3,838 Central Missouri Fort Leonard...
mopar65
OP
master
|
OP
master
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
|
Cool looking car mike. Here is the best pic I have of the mustang II frontend I have right moe
3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727
10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come...
( SGT Miller) Proudly served 12 years in the US ARMY RESERVES
support our troops
|
|
|
|
|