I ran a roots blower before switching over to an F2 Procharger 6 yrs ago. The problems then was there was no "kit" for big blocks. Called Procharger and they directed you to Bob/Terry Woods at The Supercharger Store. The mopar kit consists of a sbc kit which uses the mounting bracket with a custom adapter for the mopar alum water pump.

If I recall big time sells a kit for bbm. His car gets it the last time I saw it run. I believe he uses the SBC kit for it ?

Actually, I don't use the intake system in the pic. I run my filter directly on the intake horn of the compressor. Without inner fender panels, I have enough air circulation under the hood that it doesn't make any difference where I pick up intake air.

Oh, I didn't even pay attention to the filter, I meant the lack of an intercooler

Intercooler for sure if this were a street application - pump gas.

Has anyone tried or know anybody using the FITECH 1200 blow through FI setup? This might be an option if I keep it in the 900 hp range.

Bigtime is a procharger dealer, so he can get you any kit you want. My friend bought his there and got a good deal. He runs a crank mounted f2 on his dart now, hasn't had the sideslinger in quite a while.

There is a local guy here in the area where I live, who has a '69 Dart street/strip car with a 340 based 416 c.i. STROKER small block. He is using a Procharger on his car (not sure which model he has), but he has water injection as well.
Just his blower setup ran about $8-9k I heard once...and his car is running 9.80's in the quarter mile...FWIW.

I'm surprised that bigtimeauto hasn't chimed in yet.

He doesn't come on here anymore.

Here is my old procharged hemi at 8:06 of the video
https://www.youtube.com/watch?v=ADgmsK2zs44

Love it!!!!!!

Beautiful car.

Mine is set up similar to Crizila's. A F2 on stock stroke 440, 950 blow thru , Car runs 9.40@145mph on 15lbs boost pulling 10 degree timing.

That 'runner is awesome!...by old do you mean you have since sold it?

Blown 68 R/t, do you mind me asking what heads and cam specs? You are pretty close to where I want to be with this build. Thanks

The procharged hemi was mine. Johnny had the body built for it

Sure thing, heads are Sidewinders from Todd @ Marsh Performance heads were ported by Larry Smith. Cam is a Comp solid roller 256/264 631/631 114lsa. If I could figure out how to post pics/vids I would.

Is there anyone making or selling actual kits for sb LA engines? Anyone know what they cost?

Nice job sir, that car is awesome.